Timing belt Gates 1092 14M
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerGrip HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES 1092 14M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1092 14M and any equivalents.
The Gates PowerGrip HTD 1092 14M is a timing belt with an HTD 14M profile and a 1092 mm length. If you are replacing a belt on a synchronous drive, start by confirming the profile and length on the old belt match these values.
To match it to the belt being replaced, read the marking on the back of the old belt. You are looking for the profile, HTD 14M, and the length, 1092 mm. The pitch is 14 mm. If those three points match the data here, this Gates PowerGrip HTD belt is the correct size for that position.
The same size is also listed under Optibelt as 1092 14M. If your drive uses more than one belt, inspect all belts on the drive and replace them as a set so the load stays even across the pulleys.
When you request a quote, send the part number 1092 14M along with the profile and length from the old belt. If the marking is worn or unreadable, send a photo of the belt and the pulley grooves so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1092mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for the profile HTD 14M and the length 1092 mm. The pitch is 14 mm. If those match, the Gates PowerGrip HTD 1092 14M is the same size.
- Is this belt listed under any other brand?
- Yes. The same size is also listed under Optibelt as 1092 14M.
- What should I send to request a quote?
- Send the part number 1092 14M, plus the profile and length from the old belt. If the marking is not readable, send a photo of the belt and the pulleys.