FAG NUP2344-EX-TB-M1 cylindrical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG NUP2344-EX-TB-M1
- NUP 23Series
- Cylindrical roller bearings, NUP 23 series. Series differ in outside diameter and width even when the bore is the same.
- 44Bore
- Bore 220 mm (44 × 5).
- EX-TB-M1Suffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
NUP 2344 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG NUP2344-EX-TB-M1 belongs to cylindrical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NUP2344-EX-TB-M1 and any equivalents.
The FAG NUP-EX-TB-M is a single-row cylindrical roller bearing that handles high radial forces and axial loads in both directions. Its machined brass cage makes it a common choice for demanding industrial settings such as mining, steel production, and power transmission. MR Industrial Accessories supplies this series and can help you match the right design to your mounting.
Reading the code helps when you need to confirm a replacement. NUP means the inner ring has two ribs and the outer ring has one, so the shaft can be located axially in both directions. EX points to a reinforced-capacity design, while TB and M identify the machined brass cage and its type. The numbers that follow give the size and variant.
These bearings are found in gearboxes, presses, rolling mill rolls, main spindles, and large machine tools. Because they take combined radial and axial loads, they suit transmission shafts and other positions where the shaft must be held in place. Typical industries include mining, steelmaking, and general power transmission.
When selecting an NUP-EX-TB-M, look at the radial and axial loads, the speed, the lubrication method (grease or oil), and the operating environment. Proper alignment between shaft and housing, plus a correct fit, avoids parasitic loads. The brass cage resists heat and fatigue, so check lubrication and internal clearance regularly.
Interchange with other brands is possible if the main dimensions, load capacity, and design type match. Tolerances, clearance, and the axial locating system still need to be compared. MR Industrial Accessories can help you find a suitable equivalent from our bearing range.
To request a quote, send the complete part number or model by WhatsApp or email. Our team replies promptly with technical data and can advise on design or mounting questions.
Dimensions
- Bore
- 220mm
Frequently asked questions
- What does the NUP-EX-TB-M designation indicate?
- NUP describes a cylindrical roller bearing with two ribs on the inner ring and one on the outer ring. EX is a reinforced design, TB is the machined brass cage, and M is the cage type. The number after NUP gives the size.
- Can this bearing take axial loads?
- Yes. The NUP design accepts axial loads in both directions along with high radial loads. It works for combined forces when mounting and lubrication are correct.
- How do I request a quote for an FAG NUP-EX-TB-M bearing?
- Send the complete part number or the model you need via WhatsApp or email. MR Industrial Accessories will reply promptly with a quote and the relevant technical data.