FAG N240-E-M1 cylindrical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG N240-E-M1
- N 2Series
- Cylindrical roller bearings, N 2 series. Series differ in outside diameter and width even when the bore is the same.
- 40Bore
- Bore 200 mm (40 × 5).
- E-M1Suffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
N 240 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG N240-E-M1 belongs to cylindrical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for N240-E-M1 and any equivalents.
The FAG N E M1 line covers cylindrical roller bearings built for high radial loads and elevated speeds. A machined brass cage and cylindrical roller set suit them to demanding machinery, and MR Industrial Accessories LLC supplies them as part of its bearing range for customers in the United States and Latin America.
Reading the code helps you match a replacement. The N tells you the outer ring has no ribs while the inner ring carries two, so the bearing accommodates axial displacement. What follows is the dimension series, which is why N238-E-M1, N240-E-M1 and N332-E-M1 differ in size. The E marks a higher-load design, and M1 identifies a one-piece machined brass cage for demanding duty.
Typical installation points include gearboxes, machine tools, pumps, fans and power transmission equipment, as well as steel, cement, mining and paper operations. Where a transmission shaft needs rigidity and precision under radial load, this design is a common choice.
Selection comes down to three inputs: the radial load the shaft carries, the speed it turns at, and the surrounding conditions. During mounting, use the proper tools and keep blows away from rollers and raceways. Grease or oil both work as lubricants depending on the application. Shaft-to-housing alignment matters, since misalignment adds stress, and sealing should match the environment, with extra protection where contamination is present.
On interchangeability, cylindrical roller bearings from different makers can swap when the main dimensions and tolerances line up. Load capacity and suffixes can still differ between brands, so compare the technical data and confirm with the full part number before ordering.
For a quote on an FAG cylindrical roller bearing, message us on WhatsApp or by email with the part number or model. The team responds promptly and can suggest equivalents or help you pick the right bearing.
Dimensions
- Bore
- 200mm
Frequently asked questions
- What does the M1 suffix indicate on an FAG bearing?
- M1 identifies a one-piece machined brass cage. It guides the rollers precisely and handles high speeds and loads well.
- How do N and NU bearings differ?
- The rib arrangement is the difference. N has two ribs on the inner ring and none on the outer ring; NU is the reverse, with two ribs on the outer ring and none on the inner. Your choice depends on whether axial displacement must be allowed and on how the bearing is mounted.
- What matters when mounting a cylindrical roller bearing?
- Keep the shaft and housing aligned, use suitable mounting tools, and avoid direct blows to rollers or raceways. Choose the correct lubricant and check internal clearance for the application.