FAG AHX3224A withdrawal sleeve
- Brand
- FAG
- Category
- Bushings and sleeves
- Subcategory
- Withdrawal sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
FAG AHX3224A belongs to withdrawal sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AHX3224A and any equivalents.
When a bearing on a tapered shaft needs to come off, a FAG AHX withdrawal sleeve makes the job manageable. It sits between the bearing and the withdrawal nut, so the removal force goes where it should without harming the bearing or the shaft. Maintenance teams rely on it for work in tight spots where accuracy matters.
The code tells you what you are holding. AHX marks the withdrawal sleeve family. The digits that follow tie the sleeve to a bearing series: AHX3222A fits bearings in series 3222, and AHX3224A fits series 3224. The trailing A points to a design variant, often tied to thread or dimensional details. Read the code correctly and you can match the sleeve to the bearing before you start.
These sleeves show up wherever tapered-shaft bearings need periodic service: steel mills, cement plants, mines, food processing lines, gearboxes, conveyors, and heavy equipment. MR Industrial Accessories LLC supplies the FAG line to plants across the United States and in several Latin American countries, so you can get the right sleeve for your dismounting work.
Choosing the right sleeve starts with the bearing you plan to remove. Check that the thread and dimensions line up. Before assembly, wipe the contact surfaces clean and apply a light film of lubricant to help the sleeve slide into place. Keep the sleeve and shaft aligned; misalignment introduces side loads that can hurt the bearing. Use the correct withdrawal nut and follow the maker's instructions for a safe, efficient job.
Not every brand builds withdrawal sleeves to the same dimensions or thread. Before you swap in a part from another source, confirm the specifications match. The FAG AHX series is well known in the field, but any interchange still needs a check against the technical data. Send us the part number and we can help you find a suitable equivalent.
Need a FAG AHX withdrawal sleeve? Message us on WhatsApp or email with the part number or model. We reply promptly so your maintenance schedule stays on track.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I find the right withdrawal sleeve?
- Start with the part number of the bearing you need to dismount. The sleeve series should correspond; for instance, AHX3222A is used with bearings in series 3222 and AHX3224A with series 3224. If you are unsure, send the bearing number via WhatsApp and we will assist.
- Can I use a FAG withdrawal sleeve in place of another brand?
- Sometimes, but dimensions and threads differ between manufacturers. Always verify the technical specifications before substituting. Share the part number with us and we will help you check compatibility.
- What should I watch out for during installation?
- Clean the mating surfaces, lubricate the threads, and make sure the sleeve and shaft are aligned to prevent damage. Use the correct withdrawal nut and follow the manufacturer's instructions. Poor installation can harm the bearing or the shaft.