FAG 6205-C-2Z deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 6205-C-2Z
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 05Bore
- Bore 25 mm (05 × 5).
- C-2ZSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6205 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 6205-C-2Z measures 25 mm across the bore and 52 mm across the outside diameter; its width is 15 mm (25 x 52 x 15 mm).
FAG 6205-C-2Z belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6205-C-2Z and any equivalents.
The FAG deep groove ball bearing in the -C-2Z series is a single-row design with two metal shields and C internal clearance. It handles moderate radial and axial loads in high-speed equipment where a light barrier is enough to keep grease in and dust out. Its straightforward mounting and low maintenance make it a common choice across many industries.
The part number tells you what you are getting. The base number defines the size: in the 60 series, for instance, 6000-C-2Z, 6001-C-2Z and 6002-C-2Z share the same bore but differ in outer diameter and width. The letter C stands for the special radial internal clearance, and the 2Z suffix means two metal protective shields, one on each side. Always order using the complete code.
You will find these bearings in electric motors, fans, centrifugal pumps, light reducers, machine tools, and packaging or conveying equipment. They also appear in food lines, blowers, screw compressors and transmission systems where a compact, low-friction unit is needed. The 2Z shield suits dusty or fine-chip environments without the extra friction of a contact seal.
When selecting, consider the radial and axial load, the rotation speed and the type of contaminant. The C clearance is a good fit when interference fits or thermal gradients exist between shaft and housing. The bearing comes pre-lubricated and normally needs no relubrication. During mounting, check shaft alignment with the housing and avoid striking the shields; an off-center seat will shorten service life.
Bearings from different brands with the same dimensions and design are interchangeable, provided bore, outer diameter, width and sealing type match. Variations typically lie in internal clearance, steel quality and lubricant. If you swap one code for another, compare the suffix letters before installation. We can help you verify with the code or model you have.
To request a quote, send the complete code via WhatsApp or email. With the base number and suffixes, we identify the design and reply promptly. You can also ask about other sizes in the same series or sealing variants for more demanding environments.
Dimensions
25 x 52 x 15 mm (d x D x B): boundary dimensions for basic designation 6205, according to ISO 15.
- Bore
- 25mm
- Outside diameter (D)
- 52mm
- Width (B)
- 15mm
SKF and other brands, same size
Other brands' pages with basic designation 6205: 25 x 52 x 15 mm (d x D x B) per ISO 15.
- Need the SKF 6205? We can also quote:6205-2Z6205-2ZNR6205-2Z/C355 more →
- KOYO62056205R
- NSK6205 ZZ6205
- RKB6205
- TIMKEN6205
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 6205-C-2Z bearing: what are its dimensions?
- FAG 6205-C-2Z measures 25 mm across the bore and 52 mm across the outside diameter; its width is 15 mm (25 x 52 x 15 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6205.
- What does the 2Z suffix mean on a FAG bearing?
- The 2Z suffix indicates two metal protective shields, one on each side. These shields retain grease and slow the ingress of coarse dust, but they do not seal against liquids. It is a light solution with less friction than a contact seal.
- How do I request a quote for a deep groove ball bearing?
- Send us the complete code on WhatsApp, for example 6004-C-2Z, or provide the shaft and housing dimensions. With that information we identify the design and reply promptly. If you do not have the code, send a photo of the part and its dimensions.
- Can a bearing from one brand be replaced by another?
- Yes, if the main dimensions and design type match. A deep groove ball bearing with the same bore, outer diameter and width can be mounted in the same housing. Check that the clearance and sealing suffixes are equivalent before installing it.