FAG 61914-2RZ deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 61914-2RZ
- 619Series
- Deep groove ball bearings, 619 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- 2RZSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
61914 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 61914-2RZ measures 70 mm across the bore and 100 mm across the outside diameter; its width is 16 mm (70 x 100 x 16 mm).
FAG 61914-2RZ belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 61914-2RZ and any equivalents.
FAG 619-2RZ deep groove ball bearings are thin-section units that carry moderate radial and axial loads where radial space is tight. The 2RZ suffix means low-friction seals on both sides. MR Industrial Accessories LLC supplies this line to maintenance and purchasing teams across the United States and in several Latin American countries.
Reading the code helps you confirm what you need. The 619 block identifies a thin-section deep groove ball bearing series. The 2RZ suffix tells you the bearing is sealed on both sides with low-friction seals. In references such as 61909-2RZ, 61910-2RZ, 61911-2RZ, 61913-2RZ and 61914-2RZ, the two digits before the suffix give the bore size according to the code table. The seals do not alter the outer dimensions; they add contaminant protection and help keep lubricant in place.
These bearings suit compact, sealed arrangements. You will find them in small electric motors, gearboxes, fans, centrifugal pumps, laboratory equipment and textile machinery. In this region they also show up in packaging lines, compressed air systems and rotating equipment maintenance where axial and radial space is limited. Because the 619 series has the thinnest section among deep groove ball bearings, it is intended for light loads and moderate to high speeds.
Selection comes down to shaft diameter, load type and operating environment. The 2RZ seal guards against dust and moisture, but it does not replace proper lubrication: check that the grease or oil is compatible with the seal material and the working temperature. During mounting, align the housings carefully and avoid impacts on the rings, since the thin section deforms more easily. On equipment with vibration, verify internal clearance and housing fit.
For equivalents, deep groove ball bearings are identified by their numeric designation plus sealing or clearance suffixes. Other manufacturers may use similar codes, yet tolerances and internal clearance can differ. When replacing a bearing, compare the seal type and clearance class, not just the number. If anything is unclear, send the complete code along with shaft and housing dimensions and we will help you choose.
MR Industrial Accessories LLC supplies FAG bearings as one of the brands in its range. To request a quote for a 619 series bearing with 2RZ sealing, send the code or model by WhatsApp or email. The team replies promptly and can suggest equivalents and assist with selection.
Dimensions
70 x 100 x 16 mm (d x D x B): boundary dimensions for basic designation 61914, according to ISO 15.
- Bore
- 70mm
- Outside diameter (D)
- 100mm
- Width (B)
- 16mm
SKF and other brands, same size
Other brands' pages with basic designation 61914: 70 x 100 x 16 mm (d x D x B) per ISO 15.
- Need the SKF 61914? We can also quote:61914-2RZ61914-2RS161914
- RKB61914
- TIMKEN61914
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 61914-2RZ bearing: what are its dimensions?
- FAG 61914-2RZ measures 70 mm across the bore and 100 mm across the outside diameter; its width is 16 mm (70 x 100 x 16 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 61914.
- What does the 2RZ suffix mean on a FAG bearing?
- It means the bearing has low-friction seals on both sides. These seals keep out dust and moisture and help retain lubricant. They do not change the bearing's outer dimensions.
- How do I choose the right 619 series bearing for my equipment?
- You need the shaft diameter, the load type and the working conditions. The 619 series is thin-section and suited to light loads. If you have the old code, send it with the dimensions and we will help you select.
- Are FAG 619-2RZ series bearings interchangeable with other brands?
- Equivalents may exist, but check the seal type and internal clearance, as they do not always match. The numeric designation helps, though tolerances can vary. Contact us with the code and dimensions to confirm interchangeability.