FAG 51413-MP thrust ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Thrust ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 51413-MP
- 514Series
- Thrust ball bearings, 514 series. Series differ in outside diameter and width even when the bore is the same.
- 13Bore
- Bore 65 mm (13 × 5).
- MPSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
51413 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 51413-MP measures 65 mm across the bore and 140 mm across the outside diameter; its height is 56 mm (65 x 140 x 56 mm).
FAG 51413-MP belongs to thrust ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 51413-MP and any equivalents.
For equipment where axial forces dominate, the FAG MP series thrust ball bearing provides a dependable solution. This series covers single-direction thrust ball bearings identified by a five-digit size code plus the MP suffix. MR Industrial Accessories supplies these bearings to maintenance and purchasing teams throughout the United States and Latin America.
The part number structure is straightforward: a five-digit number indicates size and load capacity, followed by MP. Examples include 51130-MP, 51132-MP and 51134-MP. The MP suffix denotes a machined brass cage, a feature intended for demanding operating conditions. Reading the code this way helps you confirm the size and key characteristic before ordering.
These bearings are found in gearboxes, pumps, compressors, machine tools and lifting equipment, where axial loads are the primary concern. They support unidirectional loads, making them suitable for assemblies that call for precision and axial rigidity.
Selection should account for the axial load, rotational speed and the operating environment. Check that the rings are properly aligned and that lubrication, whether grease or oil, is adequate. Use the correct tools during mounting to prevent damage to the raceways. The machined brass cage contributes strength and heat dissipation.
Other brands may offer bearings with similar designations, but dimensions and tolerances can differ. Interchangeability is not always direct, so it is wise to verify the details with a specialist. MR Industrial Accessories can help you compare options and choose the right bearing for your application.
To request a quote for an FAG MP series thrust ball bearing, send the part number to our team via WhatsApp or email. We respond promptly and can suggest equivalents or assist with selection.
Dimensions
65 x 140 x 56 mm (d x D x H): boundary dimensions for basic designation 51413, according to ISO 104.
- Bore
- 65mm
- Outside diameter (D)
- 140mm
- Height (H)
- 56mm
SKF and other brands, same size
Other brands' pages with basic designation 51413: 65 x 140 x 56 mm (d x D x H) per ISO 104.
What they share are the ISO 104 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 51413-MP bearing: what are its dimensions?
- FAG 51413-MP measures 65 mm across the bore and 140 mm across the outside diameter; its height is 56 mm (65 x 140 x 56 mm). Those are the boundary dimensions standardized in ISO 104 for basic designation 51413.
- What does the MP suffix indicate?
- The MP suffix means the bearing has a machined brass cage, which offers strength and heat dissipation for high-load or high-speed use.
- How do I select the correct size?
- Consider the axial load, shaft diameter and housing dimensions. With those details, we can help you identify the right part number in the MP series.
- Are FAG MP series bearings interchangeable with other brands?
- Dimensional equivalents may exist, but interchangeability is not automatic. Verify tolerances and features. Contact us with the part number and we will help you find a suitable option.