FAG 3307-DA angular contact ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 3307-DA
- 33Series
- Angular contact ball bearings, 33 series. Series differ in outside diameter and width even when the bore is the same.
- 07Bore
- Bore 35 mm (07 × 5).
- DASuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
3307 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 3307-DA measures 35 mm across the bore and 80 mm across the outside diameter; its width is 34.9 mm (35 x 80 x 34.9 mm).
FAG 3307-DA belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3307-DA and any equivalents.
FAG -DA series angular contact ball bearings are single-row units whose raceways are built to handle combined radial and axial loads acting in one direction. They suit equipment where rotational accuracy and axial capacity matter, including pumps, compressors, gearboxes and spindles. MR Industrial Accessories LLC supplies this line and helps you match the right code to your application.
The code combines a basic number with the -DA suffix. The number reflects size, as seen in 3306-DA, 3307-DA, 3309-DA, 3312-DA, 3313-DA and 3314-DA. The -DA suffix marks a design variant in FAG's angular contact range, here a single-row layout. Always confirm the full number together with the mounting dimensions before ordering.
Typical uses include centrifugal pumps, screw compressors, gearboxes, industrial fans and machine tool spindles, where radial and axial forces occur together. Their high-speed capability and stiffness make them a fit for drives where internal clearance and alignment are critical.
When choosing a bearing, review the axial load direction, sealing or protection type, internal clearance and lubrication method. During mounting, keep the shaft and housing aligned and apply the preload or clearance specified by the manufacturer. Correct grease or oil lubrication and effective sealing keep contaminants out and help extend service life. For paired mounting, check the arrangement and axial fit.
Bearings from other brands may interchange if the main dimensions, contact angle and clearance agree. The basic number alone is not enough; tolerances, load capacity and sealing configuration must also be compared. Send the full code and operating conditions and we will help you verify an equivalent.
To request a quote, message us on WhatsApp or email with the exact code from the equipment or drawing. MR Industrial Accessories LLC replies promptly with technical and commercial information. You can also ask about variants or special sizes.
Dimensions
35 x 80 x 34.9 mm (d x D x B): boundary dimensions for basic designation 3307, according to ISO 15.
- Bore
- 35mm
- Outside diameter (D)
- 80mm
- Width (B)
- 34.9mm
Same size, other brands
Other brands' pages with basic designation 3307: 35 x 80 x 34.9 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 3307-DA bearing: what are its dimensions?
- FAG 3307-DA measures 35 mm across the bore and 80 mm across the outside diameter; its width is 34.9 mm (35 x 80 x 34.9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 3307.
- What does the -DA suffix indicate on a FAG bearing?
- The -DA suffix denotes a design variant within FAG's angular contact ball bearing series. For the exact technical characteristics of your code, share the full number and dimensions with us.
- How do I request a quote for a FAG -DA series bearing?
- Send the complete code (for example, 3306-DA) and the quantity you need by WhatsApp or email. We will reply promptly with the quote.
- Can a bearing from this series be replaced by one from another brand?
- Often yes, provided dimensions, contact angle and clearance match. Do not rely on the basic number alone; send us the code and working conditions so we can check interchangeability.