FAG 3200-B-2RS-TVH angular contact ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 3200-B-2RS-TVH
- 32Series
- Angular contact ball bearings, 32 series. Series differ in outside diameter and width even when the bore is the same.
- 00Bore
- Bore 10 mm: by standard, 00 designates 10 mm.
- B-2RS-TVHSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
3200 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 3200-B-2RS-TVH measures 10 mm across the bore and 30 mm across the outside diameter; its width is 14 mm (10 x 30 x 14 mm).
FAG 3200-B-2RS-TVH belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3200-B-2RS-TVH and any equivalents.
FAG angular contact bearings handle combined radial and axial loads in one direction thanks to their offset raceways. The B and 2RS variants are a practical choice for pumps, gearboxes, compressors and transmission equipment that need rigidity and protection from dirt. MR Industrial Accessories LLC supplies this series and can help you confirm the right part number for your application.
Reading the bearing code is straightforward once you know the blocks. For example, in 3000-B-2RS-TVH or 3007-B-2RS-TVH, the first digits give the size and dimensional series. The letter B points to a modified contact angle common in angular contact designs. The suffix 2RS means seals on both sides, and TVH identifies a synthetic cage guided by the balls. These details let you pinpoint the exact variant in the catalog.
You will find these bearings in centrifugal pumps, gearboxes, screw compressors, fans and process machinery. They also suit machine tools and transmission systems where axial load acts in one direction and rigid support matters. Because they are sealed, they work well in dusty or moderately humid environments, as long as the temperature stays within the seal's range.
When selecting, remember that this bearing supports axial load in only one direction. That is why it is usually mounted in opposed pairs or with another bearing that takes the opposite thrust. The 2RS seals come pre-lubricated from the factory, so no extra greasing is needed in most cases. During installation, keep alignment accurate and avoid hitting the edges, since poor seating shortens service life. If the equipment vibrates, check internal clearance and housing fit.
For replacement, interchangeability depends on the full designation: bore diameter, dimensional series, contact angle and sealing type. A part number with B and 2RS is not the same as one without seals or with a different design letter. If the original bearing has no visible marking, measure it and compare with the manufacturer's catalog. Our team can help validate the equivalence before you order.
If you already have the bearing part number or the equipment model, send it via WhatsApp or email and we will quote you promptly. You can also ask about other variants in the same family or equivalent bearings from brands we supply.
Dimensions
10 x 30 x 14 mm (d x D x B): boundary dimensions for basic designation 3200, according to ISO 15.
- Bore
- 10mm
- Outside diameter (D)
- 30mm
- Width (B)
- 14mm
Same size, other brands
Other brands' pages with basic designation 3200: 10 x 30 x 14 mm (d x D x B) per ISO 15.
- RKB3200
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 3200-B-2RS-TVH bearing: what are its dimensions?
- FAG 3200-B-2RS-TVH measures 10 mm across the bore and 30 mm across the outside diameter; its width is 14 mm (10 x 30 x 14 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 3200.
- What does the 2RS suffix mean on a FAG bearing?
- The 2RS suffix means the bearing has contact seals on both sides. This keeps the factory lubrication inside and blocks dust or moisture, so the bearing usually does not need relubrication.
- How do I know if this bearing replaces the one I have mounted?
- Compare the complete designation: number, letter B, suffix 2RS and cage type. If they match, it is the same type. If you are unsure, send us a photo or the part number via WhatsApp or email and we will verify it with you.
- Can it be mounted alone, without another opposed bearing?
- It is not recommended, because angular contact bearings take axial load in one direction only. The usual practice is to mount them in opposed pairs or with another support that handles the opposite thrust.