FAG 30316-A tapered roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 30316-A
- 303Series
- Tapered roller bearings, 303 series. Series differ in outside diameter and width even when the bore is the same.
- 16Bore
- Bore 80 mm (16 × 5).
- ASuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
30316 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 30316-A measures 80 mm across the bore and 170 mm across the outside diameter; its total width is 42.5 mm (80 x 170 x 42.5 mm).
FAG 30316-A belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 30316-A and any equivalents.
Tapered roller bearings in the FAG -A series are built for applications where radial and axial forces act at the same time. The angled raceways create a linear contact pattern that supports heavy loads and adds rigidity to the assembly. You will find them in gearboxes, speed reducers, wheel hubs and machine tools, where running accuracy and long service matter. MR Industrial Accessories supplies this line as one of the brands in its catalog.
Codes in this series include 30304-A, 30305-A, 30307-A, 30308-A, 30309-A, 30313-A, 30314-A and 30315-A. Reading the number: the leading digits define the bearing type and the dimension series, while the -A suffix points to an internal variation, often a revised roller or cage design. Bore, outer diameter and width follow from the code, so having the full designation makes selection straightforward. If the marking is worn or unclear, our team can help you decode the nomenclature.
These bearings show up across many industries. Typical installations include agricultural gearboxes, conveyors, flour mills, mining equipment and cement plants, as well as wheel hubs on commercial vehicles, road machinery and railway equipment. Because they take radial and axial loads together, they suit reducers and power transmission systems where both force directions are present.
When choosing a bearing, look at load size and direction, operating speed and the surrounding environment. Fitting calls for accurate alignment and correct axial clearance, usually set with nuts or shims. Lubrication can be grease or oil depending on the application, and a lubricant with EP additives is a common choice for high loads. Sealing should match the site: in dirty conditions, effective seals keep particles out. Follow the manufacturer's instructions for mounting and startup.
On interchangeability, tapered roller bearings from different brands can often be swapped when the main dimensions and series design line up. Tolerances and internal clearance can differ between makers, so check them. For a replacement, the safest route is to send the complete code engraved on the old bearing. We can review compatibility and suggest suitable alternatives.
To request a quote for FAG -A series tapered roller bearings, message us on WhatsApp or email the code or dimensions you need. Our team responds promptly and can help you confirm the right part for your project.
Dimensions
80 x 170 x 42.5 mm (d x D x T): boundary dimensions for basic designation 30316, according to ISO 355.
- Bore
- 80mm
- Outside diameter (D)
- 170mm
- Total width (T)
- 42.5mm
SKF and other brands, same size
Other brands' pages with basic designation 30316: 80 x 170 x 42.5 mm (d x D x T) per ISO 355.
- Need the SKF 30316? We can also quote:30316
- NTN30316U2GB30316DU7GB
- RKB30316
- TIMKEN30316
What they share are the ISO 355 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 30316-A bearing: what are its dimensions?
- FAG 30316-A measures 80 mm across the bore and 170 mm across the outside diameter; its total width is 42.5 mm (80 x 170 x 42.5 mm). Those are the boundary dimensions standardized in ISO 355 for basic designation 30316.
- What does the -A suffix mean in these bearings?
- The -A suffix marks a design variant within the series, which may involve changes to the cage, rollers or surface treatment. For the exact characteristics of a specific code, contact us on WhatsApp.
- How do I choose the right tapered roller bearing?
- You need the radial and axial loads, speed, available space and environmental conditions. With that information we can recommend the correct code. Write to us on WhatsApp and we will advise you.
- Do FAG bearings have equivalences with other brands?
- In general they can be interchanged with bearings from other brands that share the same dimensions and series design. Always verify tolerances and internal clearance. Consult us about compatibility for your application.