FAG 22326-E1-XL-K-T41A spherical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 22326-E1-XL-K-T41A
- 223Series
- Spherical roller bearings, 223 series. Series differ in outside diameter and width even when the bore is the same.
- 26Bore
- Bore 130 mm (26 × 5).
- E1-XL-K-T41ASuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22326 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 22326-E1-XL-K-T41A measures 130 mm across the bore and 280 mm across the outside diameter; its width is 93 mm (130 x 280 x 93 mm).
FAG 22326-E1-XL-K-T41A belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22326-E1-XL-K-T41A and any equivalents.
This FAG spherical roller bearing is a self-aligning, double-row unit. The outer ring has a spherical raceway and the rollers are crowned. It handles radial and axial loads in both directions and tolerates angular misalignment between shaft and housing. It is a common choice where shaft deflection or mounting errors occur during normal operation.
The part number is built in blocks. The base number gives the size and dimension series. The E1 suffix denotes an optimized roller and cage design. XL identifies the long-life execution. K means a tapered bore. T41A refers to a specific thermal and clearance execution. So a code like 22312-E1-XL-K-T41A packs size, internal design and bore type into one string.
These bearings are found in conveyors, mills, mixers, slurry pumps, industrial fans and crushing equipment. They also appear in road machinery, cranes and transmission systems where the shaft runs under deflection. Because they are self-aligning, they absorb misalignments that other bearings cannot tolerate. That makes them common in aggregate, cement, food and water treatment plants.
Selection depends on radial and axial load, rotational speed and bore type. The K variant mounts on a tapered shaft, with an adapter sleeve or bushing, which simplifies internal clearance adjustment. Sealing and lubrication follow the environment: in dusty or wet areas, evaluate additional protection. Initial alignment and mounting clearance are key for the bearing to run within its parameters.
Equivalents vary by maker. Each manufacturer uses its own suffixes for design, cage, bore and heat treatment. The same size can carry different codes between brands, and they are not always interchangeable without checking tolerances and clearance. The safest approach is to request a quote with the complete code from the equipment or drawing. MR can advise on the correct designation.
To replace a spherical roller bearing, send the code by WhatsApp. With the full number, such as 22314-E1-XL-K-T41A, the variant can be identified and your quote prepared. You can also ask about other sizes in the same series.
Dimensions
130 x 280 x 93 mm (d x D x B): boundary dimensions for basic designation 22326, according to ISO 15.
- Bore
- 130mm
- Outside diameter (D)
- 280mm
- Width (B)
- 93mm
SKF and other brands, same size
Other brands' pages with basic designation 22326: 130 x 280 x 93 mm (d x D x B) per ISO 15.
- Need the SKF 22326? We can also quote:22326 CC/W3322326 CCK/W3322326 CC/C3W336 more →
- LINK-BELT2232622326LB22326LBK2 more →
- NSK22326CE422326CKE422326CAME41 more →
- NTN22326EAD122326EMD122326EAKD13 more →
- RKB22326
- TIMKEN22326EJ22326EM
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 22326-E1-XL-K-T41A bearing: what are its dimensions?
- FAG 22326-E1-XL-K-T41A measures 130 mm across the bore and 280 mm across the outside diameter; its width is 93 mm (130 x 280 x 93 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22326.
- What does the K suffix mean on a FAG bearing?
- K indicates a tapered bore. It mounts on a tapered shaft or with an adapter sleeve, allowing internal clearance to be adjusted during tightening. It is common when removable mounting or a more precise fit is needed.
- How do I know which spherical roller bearing code I need?
- Read the code engraved on the original bearing or on the equipment drawing. If it is not available, send the shaft and housing dimensions and the approximate load. With that data, an equivalent designation can be advised.
- Is this bearing suitable for axial loads?
- Yes, spherical roller bearings support radial and axial loads in both directions. Axial capacity depends on size and internal design. For applications with significant axial load, verify the ratio between radial and axial load before selecting.