FAG 22319-E1-XL-T41D spherical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding FAG 22319-E1-XL-T41D
- 223Series
- Spherical roller bearings, 223 series. Series differ in outside diameter and width even when the bore is the same.
- 19Bore
- Bore 95 mm (19 × 5).
- E1-XL-T41DSuffix
- FAG suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
22319 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
FAG 22319-E1-XL-T41D measures 95 mm across the bore and 200 mm across the outside diameter; its width is 67 mm (95 x 200 x 67 mm).
FAG 22319-E1-XL-T41D belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 22319-E1-XL-T41D and any equivalents.
When a shaft runs long, flexes or sits slightly out of line with its housing, a spherical roller bearing is often the answer. The FAG 22317-E1-XL-T41D is a self-aligning unit with two rows of rollers running on a spherical raceway in the outer ring, so it carries radial and axial loads together and tolerates misalignment between the two seats.
Read the designation piece by piece rather than as one string. The base number 22317-E1-XL-T41D starts with the 223 series, which identifies a wide-section spherical roller bearing. The E1 suffix marks the design that uses a brass cage and offers higher load capacity. XL points to improved lubricant and temperature performance. T41D covers a special internal clearance and precision execution. Put those blocks together and you have the exact bearing to order.
Typical homes for this bearing are machines with long shafts or shafts that bend under load: conveyors, mills, crushers, centrifugal pumps, industrial fans and paper machinery. Its self-aligning behavior soaks up alignment error between housings and keeps parasitic loads from building up, which is one of the ways bearings lose life early.
Selection comes down to radial load, axial load, rotation speed and the surrounding environment. Open or sealed execution depends on how much contamination is present, and the T41D internal clearance suits particular thermal conditions. At mounting, confirm that the housings line up, work with the right tools and apply the specified grease or oil. Sloppy mounting practice remains a common cause of premature failure.
Spherical roller bearings exist under several brands with designations that look equivalent. When you compare them, check the main dimensions, the cage type and the clearance. Interchangeability is not automatic, since load capacity and tolerances can differ from one maker to another. MR supplies FAG as a brand and also other options, so you can pick what suits the equipment.
To replace a spherical roller bearing, send the full part number to MR by WhatsApp or email. Give us the model and brand of the machine as well and the team will reply promptly. They can also suggest equivalents and help with mounting, lubrication and seal selection.
Dimensions
95 x 200 x 67 mm (d x D x B): boundary dimensions for basic designation 22319, according to ISO 15.
- Bore
- 95mm
- Outside diameter (D)
- 200mm
- Width (B)
- 67mm
SKF and other brands, same size
Other brands' pages with basic designation 22319: 95 x 200 x 67 mm (d x D x B) per ISO 15.
- Need the SKF 22319? We can also quote:22319 E22319 EK22319 E/C33 more →
- LINK-BELT22319LB22319LBK22319LBC31 more →
- NSK22319EAE422319EAKE4
- NTN22319EAD122319EMD122319EAKD13 more →
- RKB22319
- TIMKEN22319EJ22319EM
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- FAG 22319-E1-XL-T41D bearing: what are its dimensions?
- FAG 22319-E1-XL-T41D measures 95 mm across the bore and 200 mm across the outside diameter; its width is 67 mm (95 x 200 x 67 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 22319.
- What does the T41D suffix mean on a FAG bearing?
- T41D is a special internal clearance and tolerance execution set by the manufacturer. It is not a generic code and applies to spherical roller bearings of the 223 series. Send the complete part number and we will confirm the equivalence with another manufacturer.
- How do I know if a spherical roller bearing fits my application?
- You need the radial and axial load, the speed and the shaft diameter, plus the permissible misalignment and the environment. With that data we can guide you. If you already have the part number of the original bearing, send it by WhatsApp or email and we will quote it.
- What care does the mounting of a spherical roller bearing require?
- Align the housings, clean the seat, use the appropriate mounting method and lubricate with the indicated product. Avoid direct blows on the rings. Careful mounting extends service life and prevents premature failures.