DODGE TB-DL-110L pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE TB-DL-110L belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TB-DL-110L and any equivalents.
A DODGE D-Lok mounted unit, the TB-DL-110L pairs a pillow block housing with an insert bearing, so a rotating shaft can be supported and guided with minimal setup work. The housing bolts to a machine base or steel frame, while the insert grips the shaft through the D-Lok locking arrangement, which can be adjusted without specialty tooling.
Reading the code helps when ordering. TB stands for the pillow block housing style, DL identifies the D-Lok line, and 110L points to the insert bearing size together with its locking configuration. Have the shaft diameter and the mounting style used on your equipment ready, and the exact reference can be confirmed from those two details.
Typical duty covers belt conveyors, packaging machinery, mixers, fans, centrifugal pumps and other production equipment. Food processing, cement, paper and metalworking operations rely on this style of unit where the shaft has to turn freely while dust and moisture stay out of the bearing. Continuously running drive shafts are a common application for the D-Lok line.
Before installation, confirm the shaft diameter matches the insert and that the mounting surface is stiff enough to limit vibration. Slide the shaft through the insert, tighten the locking system, and line the housing up with the remaining supports so the bearing is not loaded unevenly. The unit arrives greased for long service; in dirty or damp locations, inspect the seal and regrease on a schedule that matches the operating cycle.
For a replacement, match the series, locking style and base dimensions against the unit being removed. Comparable mounted units from other makers carry their own part numbers. Once the insert or the housing shows wear, swapping the complete assembly is the safer route to keep shaft support correct.
Send the reference TB-DL-110L, or simply the shaft diameter, through WhatsApp or email and the MR team will respond with a quote and, where useful, suggest an equivalent. Guidance on mounting and lubrication is also available.
Dimensions
- Número de producto
- 128752
- Bore
- 1-5/8 in
Frequently asked questions
- What does the code TB-DL-110L indicate?
- TB is the pillow block housing type, DL is the D-Lok series, and 110L covers the insert bearing size and its locking configuration, following the nomenclature DODGE uses for these mounted units.
- How do I pick the right D-Lok pillow block for my shaft?
- Provide the shaft diameter and the mounting type, and the correct reference can be quoted. If the original part number is known, send it and an equivalent can be identified.
- What upkeep does this unit need?
- Check alignment and seals at intervals. In dusty or humid areas, regrease according to the duty cycle. If the insert develops play or noise, replace the complete unit.