DODGE P2BSL-17M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SL
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2BSL-17M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2BSL-17M and any equivalents.
The DODGE SL series Y-bearing with insert arrives pre-assembled and aligned. It pairs a cast iron housing with an insert ball bearing, giving you a compact, self-aligning foot-mounted unit for rotating shafts. MR Industrial Accessories LLC supplies this line to plants and workshops throughout the United States and Latin America.
The part number tells you what you are holding. In P2BSL-17M, the P marks a foot-mounted housing, the 2 is the housing size, BSL identifies the construction series, 17 is the shaft size, and the M suffix covers the sealing and locking variant. Read the full code and there is no ambiguity about the unit.
You will find these units on belt conveyors, packaging lines, mixers, fans, centrifugal pumps, and food and beverage processing equipment. They suit installations where the shaft runs with slight misalignment and the frame does not need precision machining to absorb it.
Start selection from shaft diameter and load type: radial in most cases, with moderate axial thrust. Match the sealing to the environment; dusty, wet, or washdown areas call for more enclosed protection. During mounting, set the base on a flat, rigid surface, tighten the bolts one at a time, and confirm the shaft turns freely. The insert is greased at the factory, so replenish according to the duty cycle.
Mounted units interchange by shaft diameter, center height, and housing type, not by part number alone. Every manufacturer uses its own nomenclature for the same size, so cross-reference those three variables. If a unit is already on the equipment, read the number stamped on the housing or insert and compare it with the SL series.
To replace a unit or build new equipment, send the housing part number, the shaft diameter, or a photo by WhatsApp or email. Our team replies promptly, quotes the DODGE SL series reference, or suggests a compatible alternative for your mounting. We also manufacture split plummer block housings and custom parts for special cases.
Dimensions
- Bore
- 17 mm
Frequently asked questions
- How do I identify the housing I need?
- Send the part number stamped on the housing or insert, such as P2BSL-17M, by WhatsApp. If it is illegible, measure the shaft diameter and the distance between the base holes, and we will locate the equivalent unit.
- What does the M at the end of the part number mean?
- The M suffix identifies the sealing and locking variant of the insert bearing in the SL series. Different endings change protection against dust and water, so keep the original suffix or consult us if the working environment has changed.
- Can it be replaced with another brand?
- Yes. Mounted units cross-reference by shaft diameter, center height, and housing type. Send those dimensions or the original housing part number, and we will indicate the equivalent DODGE SL series reference and quote it.