DODGE P2B-VSCU-30M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VSCU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-VSCU-30M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-VSCU-30M and any equivalents.
The DODGE VSCU series covers pillow blocks that pair a split cast iron housing with a sealed, pre-lubricated insert ball bearing. These mounted units carry rotating shafts in conveyors, fans, mixers and similar transmission equipment, and they are designed for straightforward mounting and alignment.
Reading the part number helps you order without confusion. The prefix shows how the unit mounts, VSCU marks the split-housing-with-insert family, and the number before the final M gives the bore size. So P2B-VSCU-17M and P2B-VSCU-30M are two bore sizes in the same series.
Typical applications include belt and roller conveyors, mixers, mills, centrifugal pumps, industrial fans and packaging lines. In food processing, cement, paper, meatpacking and grain handling, dust, moisture and washdown are common, so the cast iron housing and the insert bearing's ability to absorb slight misalignment help keep maintenance manageable on equipment that runs long hours.
Selection starts with shaft diameter and load type: radial, axial or combined. Match the sealing to the environment; a clean warehouse and a washdown area with pressurized water call for different protection. The insert arrives lubricated, so on replacement keep the grease fitting reachable and seat the housing flat on its base. Align the unit to the shaft before tightening bolts, then verify radial clearance. Regular lubrication and careful alignment support long service life.
Insert-bearing pillow blocks from different makers often share standardized dimensions, but fastening, sealing and tolerances can differ. A compatible alternative can be checked by comparing shaft diameter, housing type and mounting configuration. MR can point you to the option that suits your equipment.
For a quote, send the full part number from the pillow block or machine manual, such as P2B-VSCU-17M or P2B-VSCU-30M, by WhatsApp or email. If you don't have it, send the shaft diameter and a photo of the mounting. The team replies promptly and can suggest equivalents or help you choose.
Dimensions
- Número de producto
- 125688
- Bore
- 30 mm
Frequently asked questions
- What does the designation P2B-VSCU-17M mean?
- P2B indicates the pillow block type; VSCU identifies the split housing series with insert bearing; 17 is the nominal shaft diameter and the final M distinguishes the bore size.
- How do I know if the pillow block is compatible with my equipment?
- Compare the shaft diameter, the distance between mounting holes and the center height. Also check the sealing type and whether the housing accepts lubrication. With that data we can tell you if the VSCU series fits your mounting.
- What lubrication does the insert bearing need?
- The insert comes lubricated from the factory. For maintenance, follow the equipment manufacturer's recommended frequency and use grease compatible with the sealing. Avoid mixing greases with different bases and check that the grease passage is clean.