DODGE P2B-SXVU-30M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXVU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SXVU-30M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXVU-30M and any equivalents.
The DODGE SXVU series Y-bearing pillow block with insert bearing arrives as a complete mounted unit: a cast iron housing with the ball insert already installed. It bolts to the frame with two fasteners, so you avoid handling a separate bearing and split housing. The assembly takes care of shaft alignment and sealing, which keeps installation straightforward.
You can decode the part number in sections. The P stands for pillow block, the following number gives the housing size, and SXVU identifies the insert and seal version. The M at the end tells you how the insert locks onto the shaft. References like P2B-SXVU-17M and P2B-SXVU-30M belong to the same series but differ in shaft diameter. Provide the full part number when requesting a quote.
These units are common on belt and roller conveyors, packaging equipment, mixers, screens, fans, and process lines in food, chemical, and aggregate operations. Their cast housing and self-aligning insert handle minor misalignment and vibration without requiring precision machining of the mounting surface. MR Industrial Accessories supplies them as a DODGE brand product.
Selection starts with shaft diameter and load direction. Most conveyor applications involve radial loads, while inclined shafts add some axial force. Check the seal type against the environment—dust, washdown, or grain—and confirm the locking method suits your shaft. During installation, set the pillow block on a flat, rigid base, align both shaft pillow blocks before final tightening, and follow the duty cycle for lubrication.
Interchangeability is possible because other brands offer Y-bearing pillow blocks with similar dimensions, but sealing, locking, and load capacity can vary. Do not swap based on appearance alone. Compare the complete part number and the bolt hole pattern. If you need a variant not shown, contact us on WhatsApp with the part number or model, and we will point you to a compatible alternative.
When you have the pillow block part number, shaft diameter, or a photo of the nameplate, send it by WhatsApp or email. We reply promptly with a quote. We can also review the whole equipment assembly to recommend the pillow block and insert that fit your application.
Dimensions
- Número de producto
- 125714
- Bore
- 30 mm
Frequently asked questions
- What does the designation P2B-SXVU-17M mean?
- P indicates pillow block, 2B is the housing size, SXVU is the insert and seal variant, and the final suffix shows the shaft locking. The number before the M gives the shaft diameter. Send the complete part number for a quote.
- Can another brand of Y-bearing pillow block replace this one?
- Dimensional equivalents exist, but sealing, locking, and capacity may differ. Compare the full part number and hole positions before replacing. If you send us the part number, we will indicate a compatible alternative.
- How is this pillow block mounted and lubricated?
- Fasten it to a flat, rigid base, align the shaft pillow blocks before final tightening, and check the insert clearance. Lubrication frequency depends on the duty cycle and environment; dusty or washdown areas need more frequent checks.