DODGE P2B-SXV-45M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXV
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SXV-45M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXV-45M and any equivalents.
The DODGE SXV pillow block is a mounted bearing unit that pairs a cast iron housing with an insert ball bearing. It bolts to a flat base and supports shafts in equipment where a compact, self-aligning, easy-to-install unit is needed. MR Industrial Accessories LLC supplies this line and helps you match the right variant to your shaft diameter and load conditions.
The SXV part number follows a simple pattern: P for pillow block, B for insert bearing, SXV for the housing and sealing style, and the trailing number for shaft size. For instance, P2B-SXV-17M fits a 17 mm shaft, and P2B-SXV-50M fits a 50 mm shaft. The M suffix marks the metric version. Reading the code this way lets you order the exact unit without guessing.
These units appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps, and process equipment across food, chemical, and aggregate plants. The cast iron housing takes moderate radial and axial loads, while the insert allows for some initial misalignment. The insert seal determines how well the unit handles dust and moisture; in humid areas or during washdowns, extra protection is recommended.
Selection starts with shaft diameter and load type, whether mostly radial or combined. Mounting calls for a flat, rigid base, aligned pillow blocks, and properly tightened bolts. The insert is packed with lithium grease and should be renewed according to operating conditions.
DODGE SXV pillow blocks interchange with other insert-bearing pillow blocks when mounting dimensions and shaft diameter match. For a quote, share the full part number or the key dimensions: shaft diameter, hole spacing, and height to center. MR Industrial Accessories LLC can suggest a suitable alternative from its bearing and housing line.
To replace a pillow block or build new equipment, send the part number P2B-SXV-... or your shaft dimensions via WhatsApp or email. The team replies promptly and can also advise on mounting and lubrication.
Dimensions
- Número de producto
- 125717
- Bore
- 45 mm
Frequently asked questions
- What does the code P2B-SXV-17M indicate?
- P means pillow block, B means insert bearing, SXV is the housing and sealing style, and 17M is the shaft diameter in millimeters. This nomenclature helps you identify the size and order the correct part number.
- How do I decide between an SXV pillow block and another housing type?
- It depends on load direction and available space. The SXV pillow block bolts to a horizontal base and handles moderate radial and axial loads. For vertical shafts or higher loads, other configurations should be reviewed. Share your equipment data and we can help.
- What lubrication does the insert bearing need?
- It uses general-purpose lithium grease. The interval depends on speed, temperature, and contamination. In dusty or wet conditions, shorten the intervals. During mounting, verify the grease passage is clean and avoid mixing greases with different bases.