DODGE P2B-SXRB-50M pillow block bearing

DODGE P2B-SXRB-50M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXRB-50M and any equivalents.

This foot-mounted pillow block pairs a split housing with a DODGE SXRB insert ball unit, so a rotating shaft can be supported and serviced without taking the line apart. MR Industrial Accessories supplies it to maintenance and purchasing teams across the United States and Latin America, and helps match the code on your unit to the right reference.

Read the code from left to right and it tells you what you have. The P marks a pillow block, the 2B the split housing style, SXRB the insert bearing series, and the closing number the shaft size in millimeters with M noting the sealing or locking variant. So P2B-SXRB-20M is a pillow block for a 20 mm shaft, and other endings in the same series cover other shaft diameters. Send us the whole code and we quote that reference or an equivalent.

You will find these units on belt conveyors, bucket elevators, mixers, mills, screens and similar process equipment in food, chemical, cement and aggregate operations. The foot pattern bolts to steel frames or concrete pads through two mounting holes, which keeps field installation and replacement straightforward.

Selection comes down to shaft diameter, the load case (radial, axial or combined), running speed and the surrounding conditions. The insert seal is what sets the level of protection against dust, water or washdown, so pick the variant that matches the environment. On installation, check that the housings line up, the base sits level and the mounting bolts are tightened to spec. Grease the insert on the schedule your maintenance plan calls for, using the lubricant the manufacturer specifies.

Housings that take insert bearings tend to share standardized dimensions across brands, which makes substitution common. When replacing an existing unit, compare shaft diameter, bolt hole spacing, center height and the locking style of the insert. We point you to the alternative that fits your code or size without reworking the structure. For other arrangements, we also manufacture split plummer block housings in-house.

Send the complete housing code, the shaft diameter or a photo of the part over WhatsApp or email. We reply quickly and tell you which option suits the equipment.