DODGE P2B-SXRAG-101 pillow block bearing

DODGE P2B-SXRAG-101 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXRAG-101 and any equivalents.

The DODGE SXR AG series Y-bearing pillow block is a foot-mounted unit that pairs a ball insert with a housing bolted to the equipment frame. It suits rotating shafts that need straightforward installation and fast changeout. MR Industrial Accessories supplies this line and can help you match the correct size to your shaft and operating conditions.

The series code breaks down into three parts. P2B denotes a pillow block housing with two mounting holes. SXR AG identifies the insert family and its sealing arrangement. The trailing number, seen in codes like P2B-SXRAG-012 or P2B-SXRAG-104, corresponds to shaft diameter; two- and three-digit numbers reflect the inch size table used across the series. The full code pinpoints the exact unit.

Typical installations include belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical and aggregate operations. The shaft usually turns at moderate speed with predominantly radial load. The foot base mounts onto profiles or sheet metal beds, so alignment is simple without extensive machining.

Selection starts with shaft diameter and load direction. Because the Y-bearing housing is designed mainly for radial forces, confirm that axial loads are not significant. Match the insert seal to the environment: dusty, wet or washdown conditions call for tighter protection. During mounting, set the base on a flat surface, tighten bolts in a cross pattern, and verify shaft alignment before startup. The insert is grease-lubricated; renew the grease based on service hours and operating temperature.

Interchange between brands is possible by shaft number and base configuration, but insert tolerances and sealing vary. A unit with equivalent performance from another line can serve as a replacement. MR Industrial Accessories supplies DODGE and can identify a compatible alternative for your equipment.

If you have the housing code, send it via WhatsApp along with the shaft diameter and a photo of the mounting. With that information we will quote the DODGE SXR AG series unit or the best alternative for your application. We can also advise on mounting and lubrication to keep the bearing aligned and running well.