DODGE P2B-SXR-17M pillow block bearing

DODGE P2B-SXR-17M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXR-17M and any equivalents.

A DODGE SXR Y-bearing pillow block is a ready-to-mount bearing unit. It pairs a cast iron housing with an insert ball bearing that comes assembled and aligned from the factory. That makes it a practical choice for supporting rotating shafts where you want a rigid housing, dependable sealing and fast installation, without machining a housing or building the unit from separate parts. MR Industrial Accessories LLC supplies this line to customers in the United States and several Latin American countries.

The part number breaks down into three parts. The P2B prefix tells you it is a two-bolt pillow block housing. The SXR block identifies the insert bearing family and its sealing arrangement. The number before the final M is the nominal shaft size. The series covers P2B-SXR-17M, P2B-SXR-20M, P2B-SXR-25M, P2B-SXR-30M, P2B-SXR-35M, P2B-SXR-40M, P2B-SXR-45M and P2B-SXR-50M. Give the full code and the unit is identified without ambiguity.

You will find these blocks on belt conveyors, bucket elevators, screens, mixers, mills, centrifugal pumps and fans. Plants that handle food, cement, grain, meat and textiles use them because the rigid housing and the insert bearing work together: shaft replacement is simpler and small misalignments are absorbed. Water treatment equipment and packaging lines that get washed down frequently are common applications as well.

Selection starts with three questions: shaft diameter, the radial and axial load the unit will see, and the environment it works in. The insert seal is what decides how much dust, water or steam the block can handle. Where there is moisture or regular washdown, choose the version with a reinforced seal. When mounting, set the housing on a flat, rigid surface, tighten the fastening bolts in a cross pattern, and confirm shaft alignment before you apply final torque. Follow the duty cycle for lubrication and check the insert clearance in the housing.

Cross-brand interchange is settled by shaft size, housing type and sealing system, not by the commercial code. A two-bolt pillow block with an insert of the same size can often be swapped between manufacturers, but you must compare center height, hole spacing, hole diameter and the insert locking method. If the original equipment carries another brand, send the code and dimensions and we will point you to the compatible option.

To replace a Y-bearing pillow block, send the complete code to MR Industrial Accessories LLC via WhatsApp or email. With the P2B-SXR reference and the shaft size we will quote the unit, and if the equipment calls for a different configuration we will suggest the best fit. We can also review mounting and sealing so the unit performs as it should.