DODGE P2B-SXR-012-NL pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SXR-012-NL belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SXR-012-NL and any equivalents.
The DODGE SXR is a pillow block mounted bearing built around an insert bearing, made to carry rotating shafts where space is tight and installation needs to stay simple. You will find it on conveyors, fans, mixers and similar power transmission equipment. MR Industrial Accessories supplies this line and helps you pin down the right configuration from your shaft diameter and the type of load the equipment applies.
Reading the code takes a moment. The letter P stands for pillow block, B is the mounting variant, SXR identifies the insert bearing series, and the trailing number gives the shaft size. Inch-based examples include P2B-SXR-008-NL and P2B-SXR-010-NL, while P2B-SXR-100-NL, P2B-SXR-101-NL and P2B-SXR-102-NL follow metric nomenclature. The NL suffix means the unit ships without a locking collar, which keeps mounting straightforward on a shaft machined to a suitable fit.
Typical service covers food, chemical, cement, paper and aggregate processing. Belt conveyors, bucket elevators, mixers, blowers and centrifugal pumps are common hosts. The housing bolts down to steelwork or a concrete base, and the insert bearing absorbs a slight amount of misalignment, which eases the maintenance burden on long shafts and on equipment that vibrates.
Selection comes down to three things: shaft diameter, whether the load is radial, axial or combined, and the surrounding environment. The insert seal keeps dust and moisture out, so in washdown areas or where fine particles are present, confirm which seal type you are getting. During installation, line the housing up with the shaft, tighten the base without forcing it, and lubricate to suit the operating conditions. Getting the alignment right is what keeps the bearing running and avoids early failures.
Interchange is possible across brands when the key dimensions line up: shaft diameter, hole spacing, height to center and mounting type. Other lines on the market cover the same sizes as the DODGE SXR series, but it pays to measure the actual unit before you swap it. MR Industrial Accessories can compare the numbers with you and point to a compatible option for your equipment.
For a DODGE SXR pillow block, send the part number or model over WhatsApp or email. The team replies promptly, can suggest equivalents and will help you choose the right unit for the application.
Dimensions
- Bore
- 3/4 in
Frequently asked questions
- What does the NL suffix mean in the SXR series?
- It tells you the insert bearing comes without a locking collar. Mounting on a shaft with a suitable fit is simpler and there are fewer parts to handle. If your application calls for extra locking, ask about the other variants in the series.
- How do I choose the correct diameter for my shaft?
- Measure the shaft end where the pillow block will sit. In the designation, numbers such as 008, 010 or 100 give that dimension in inches or millimeters depending on the nomenclature used. Send the measurement and the corresponding part number can be quoted.
- What should I take into account for mounting?
- Check that the base is flat and lined up with the shaft, tighten the mounting bolts evenly, and lubricate the insert for the working conditions. Do not strike the bearing while fitting it. Any doubts, ask and the team will advise.