DODGE P2B-SCUAH-215 pillow block bearing

DODGE P2B-SCUAH-215 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCUAH-215 and any equivalents.

The DODGE SCUAH series is a mounted bearing unit: a cast iron housing paired with an insert ball bearing, supplied already aligned and greased. It holds rotating shafts in place where the structure needs to stay rigid, installation has to be straightforward, and slight misalignment between shaft and seat must be tolerated. Conveyors, fans, mixers and general plant equipment are typical hosts for this design, and the whole assembly can be swapped out without re-machining the mounting seat.

Reading the code helps when you order. P2B points to a two-bolt split pillow block housing. SCUAH names the Y-bearing pillow block family built around an insert ball bearing, along with its seal options. The trailing digits set the insert bore, which is why P2B-SCUAH-008, P2B-SCUAH-010 and P2B-SCUAH-215 all sit in the same series even though metric and inch sizes are mixed in. Always match the full part number before replacing a unit.

Typical duty includes belt and chain conveyors, bucket elevators, mixers, exhaust fans, screens and packaging lines, plus water treatment equipment, feed mills and maintenance shops that prefer to change out a complete unit. Because it is a mounted bearing, the housing bolts to the frame and the shaft locks into the insert with set screws. That keeps assembly simple and shortens downtime next to a conventional pillow block bearing.

Selection comes down to shaft diameter, load direction (radial, axial or combined) and the surrounding environment. Where dust, water or washdown is present, the insert's reinforced sealing is the better call. For high temperature or high speed, look at lubrication and internal clearance instead. The base must be flat and rigid, the fasteners properly torqued, and the shaft lined up with the neighboring housing. Misalignment wears the seal and insert faster, so a straightedge or dial indicator check before start-up pays off.

Interchange across brands is based on shaft size, housing configuration and insert type, not on the commercial part number. A two-bolt split pillow block housing with a ball insert can be swapped with units from other makers that share those critical dimensions, but height, hole spacing and fastening method often differ and should be confirmed. Share the part number or the dimensions of the assembly you are replacing and we will point you to the compatible option.

For the DODGE SCUAH series Y-bearing pillow block, send the complete part number, or the shaft and seat dimensions, through WhatsApp or email. We reply promptly with a quote, and if the variant you need is not listed, tell us the model so we can recommend the best fit for your equipment.