DODGE P2B-SCM-100-NL pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCM
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCM-100-NL belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCM-100-NL and any equivalents.
The DODGE SCM is a mounted pillow block bearing unit: a cast housing and an insert ball bearing supplied together, already assembled and aligned. It carries rotating shafts on equipment that needs a simple, sturdy support that can be swapped out without a full teardown, such as conveyors, fans, mixers and general plant machinery. MR Industrial Accessories LLC supplies this DODGE line to customers throughout the United States and in Latin America, and quotes it from the full part number.
Read the SCM designation piece by piece. The leading P marks a two-bolt pillow block, and the digit after it sets the housing size. SCM then identifies the insert ball bearing series and its locking method. The closing number corresponds to the shaft diameter, so low numbers cover small shafts and high numbers cover larger ones. An NL suffix flags a particular sealing and unit configuration.
Because it is a mounted unit, a worn support is handled with the complete part number. There is no need to press the bearing out of the housing to get the line running again, which keeps unplanned downtime short.
Sizing starts with the shaft diameter and the load type, which in most transmission work is mainly radial. Inspect the shaft surface before mounting, since a scored or burred seat will spoil the insert fit. Two units that are not aligned with each other put extra load on the bearing, so line them up carefully. Tighten the insert locking screws with the correct wrench and verify clearance afterward. Lubrication follows the operating temperature and the surrounding conditions.
Units of this type can be exchanged between makers when shaft diameter, center height, hole spacing and locking style all agree. A similar-looking part number is not enough; those dimensions and the sealing arrangement have to be compared. When the original equipment carries a DODGE unit, the same SCM series is the straightforward replacement. If you need a different brand or sealing variant, send the details and we will point you to a compatible option.
Have the part number of the unit you are replacing? Send it by WhatsApp or email together with the shaft diameter and a photo of the pillow block. With that information we can quote the DODGE SCM unit or a suitable alternative for your equipment and get back to you promptly.
Dimensions
- Número de producto
- 058624
Frequently asked questions
- How do I identify the SCM pillow block I need?
- Find the part number stamped on the housing or the insert, such as P2B-SCM-107-NL, and measure the shaft diameter with a caliper. With both, we can quote the exact unit or an equivalent.
- Can I replace just the insert bearing?
- Yes. The insert comes out of the housing and a new one of the same series and shaft diameter goes in. Check the housing at the same time: a deformed or cracked seat means replacing the complete unit.
- What changes between sealing variants?
- The suffix in the designation tells you which sealing and locking configuration the insert uses. Dust, moisture or frequent washdowns call for tighter sealing. Send the part number and describe the environment, and we will identify the variant.