DODGE P2B-SCBED-204L pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCBED
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCBED-204L belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCBED-204L and any equivalents.
The SCBED series pillow block is a mounted bearing unit: a cast iron housing and a ball insert bearing supplied already assembled and aligned. It supports drive shafts on a flat base through two mounting holes, allowing rotation while carrying radial load with little maintenance. MR Industrial Accessories LLC supplies the DODGE brand to customers in the United States and several Latin American countries.
Read the SCBED designation in blocks. P2B means a two-bolt pillow block. SCBED names the housing family and the shaft locking method. The numeric suffix, as in P2B-SCBED-008L, P2B-SCBED-010L, P2B-SCBED-110L, P2B-SCBED-200L and P2B-SCBED-204L, points to the shaft size the insert is built for. The closing letter L marks the sealing variant or housing configuration inside the same series.
Typical applications include belt and roller conveyors, bucket elevators, mixers, mills, packaging belts and process lines in food, chemical and aggregate plants, as well as machines with long shafts supported at several points. Because the unit arrives assembled, mounting is simple: bolt the housing to the base and slide the shaft into the insert instead of pressing bearing and housing together.
Selection depends on shaft diameter and configuration, load type (radial, axial or combined) and site conditions. The insert seal sets how much contamination the unit tolerates, so dusty or wet areas call for tighter protection. Check base and shaft support alignment before tightening the bolts, and lubricate according to the duty cycle; a misaligned housing shortens insert life even under light load.
When comparing mounted housings, look at shaft size, housing type and locking system. Center height, hole spacing and sealing can differ between brands, so validate a replacement with those dimensions rather than the code alone. If you are replacing a housing from another brand, send the code or the dimensions and we will point you to a compatible alternative.
Send the housing code, the shaft size or a photo of the nameplate by WhatsApp or email. Our team will quote the DODGE reference you need or suggest the closest equivalent for your equipment and reply promptly.
Dimensions
- Bore
- 2-1/4 in
Frequently asked questions
- How does a pillow block differ from a flange housing?
- A pillow block sits on a flat base with two holes and holds the shaft parallel to the floor. A flange housing bolts to a vertical or horizontal face with four holes. The equipment frame decides which one fits.
- How do I find the shaft size for an SCBED housing?
- The numeric suffix of the designation refers to the shaft size. Without the code, measure the shaft diameter with a caliper and send that figure with a photo of the mounted housing so we can identify the reference.
- Can I replace another brand's housing with a DODGE unit?
- Often yes, after comparing shaft size, center height, hole spacing and sealing type. Matching the diameter alone is not enough. Send the dimensions or the original code and we will suggest a compatible alternative.