DODGE P2B-SCAH-008L pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCAH
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-SCAH-008L belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-SCAH-008L and any equivalents.
The DODGE SCAH pillow block is a mounted bearing unit that pairs a cast housing with an insert ball bearing. It mounts on a base or frame to support and guide rotating shafts where a straightforward, sturdy installation is needed. MR Industrial Accessories LLC supplies this line and can help you match the right variant to your shaft.
The part number breaks down into three parts. The P2B prefix denotes a two-bolt pillow block. SCAH identifies the insert and housing series. The number after it, as in P2B-SCAH-008L, P2B-SCAH-010L or P2B-SCAH-110L, gives the shaft size. The trailing L refers to the insert's sealing or locking arrangement. With those three pieces of information you can pinpoint the exact unit for your equipment.
You will find these pillow blocks on belt conveyors, packaging lines, mixers, blowers, centrifugal pumps and process lines in food, chemical and materials plants. They are common in maintenance work on equipment with drive shafts that needs rigid, easily replaceable support. The cast housing and ball insert handle radial loads and permit a degree of initial misalignment.
Selection depends on shaft diameter, load type and the environment. The insert seal determines how well the unit stands up to dust, water or frequent washdowns. Grease the insert bearing through the fitting and check it at every maintenance stop. When mounting, line up the housing with the shaft and tighten the fastening bolts evenly so the housing is not distorted.
Pillow blocks with insert bearings from different brands often share dimensional and mounting criteria, but they are not always interchangeable without checking center height, hole spacing and locking method. If you are replacing a DODGE SCAH with another brand or the other way around, send us the complete part number and we will point you to a compatible option.
MR Industrial Accessories LLC supplies the DODGE line and also manufactures split plummer block housings, ANSI chains and sheaves. If the pillow block you need is not listed, message us on WhatsApp with the part number or model: we will quote it and get back to you promptly.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- What does the code P2B-SCAH-010L mean?
- P2B is the two-bolt pillow block prefix; SCAH is the insert and housing series; 010 is the shaft size; and the final L identifies the sealing or locking configuration. That code orders the complete unit.
- How do I determine the shaft size I need?
- Measure the shaft diameter at the point where the insert bearing mounts. That measurement matches the number in the designation. If you are unsure, send us the diameter and the equipment type on WhatsApp and we will identify the right variant.
- Can it be replaced with another brand?
- Inserts from different brands may be equivalent, but you must verify center height, hole spacing and locking system. Send the complete part number and we will indicate a compatible alternative.