DODGE P2B-GTMUAH-25M pillow block bearing

DODGE P2B-GTMUAH-25M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTMUAH-25M and any equivalents.

The DODGE GTMU series brings together foot-mounted pillow blocks that pair a cast housing with a sealed, pre-lubricated insert ball bearing. They support rotating shafts in applications that call for a compact, self-aligning, straightforward-to-install mounted unit. MR Industrial Accessories LLC supplies this line in a range of shaft sizes.

Reading the GTMU code: the letter P stands for pillow block, the following digit (2 in the examples) sets the housing size, and B denotes the mounting variant. GTMUAH identifies the insert, including its seals and mounting provisions. The trailing number plus M gives the shaft diameter in millimeters, so 25M is 25 mm and 45M is 45 mm. P2B-GTMUAH-25M and P2B-GTMUAH-45M are therefore the same unit in two shaft sizes.

Typical installations include belt conveyors, sorting belts, mixers, blowers, centrifugal pumps and packaging lines. They also show up in aggregate processing equipment and road machinery that works outdoors, as well as in food plants, cement plants, paper mills and agro-industrial operations where dust or moisture is present and the housing and insert sealing need to hold up.

Selection comes down to shaft diameter, load type (radial, axial or combined) and the surrounding conditions. The GTMUAH insert uses seals that keep lubricant in and contaminants out. Confirm that the housing sits flat and aligns with the shaft. Depending on the variant, the insert is secured to the shaft with set screws or an eccentric collar. Proper alignment and lubrication are what carry service life.

Mounted pillow blocks are generally interchangeable across brands when part number and the shaft and housing dimensions match. The DODGE GTMU series has equivalents in other Y-bearing pillow block lines, but each maker uses its own suffixes for seals and mounting. When you ask for an alternative, supply the full code plus critical dimensions: shaft diameter, hole spacing and height to center.

To replace a Y-bearing pillow block or equip a new line, send the code to MR Industrial Accessories LLC by WhatsApp or email. We will quote the DODGE reference or point you to a compatible alternative with the same mounting dimensions, and we can advise on lubrication and sealing for your working environment.