DODGE P2B-GTMU-25M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- GTMU
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-GTMU-25M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTMU-25M and any equivalents.
The DODGE GTMU series Y-bearing pillow block is a mounted unit that pairs an insert bearing with a housing. It supports and guides rotating shafts where a simple, sturdy mounting is needed. The series comes in multiple sizes to match different shaft diameters.
The part number breaks down into three parts. The P2B prefix tells you it is a pillow block and how it mounts. GTMU identifies the insert bearing series. The number at the end, as in P2B-GTMU-25M or P2B-GTMU-45M, gives the shaft diameter in millimeters. The trailing M indicates the sealing or fastening variant. Once you know this pattern, you can read a replacement or a new size directly from the code.
You will find these units on conveyors, belts, elevators, mixers, fans, and in agricultural or food machinery. The pillow block design simplifies mounting on metal frames and lets you align the shaft within controlled tolerances. The housing also shields the insert bearing from dirt and impacts common in industrial settings.
When choosing a pillow block, consider shaft diameter, load type, and the environment. Pick the insert seal based on whether dust, moisture, or frequent washdowns are present. Correct lubrication and accurate alignment help the unit last. During installation, make sure the mounting surface is clean and flat, and tighten the fastening screws evenly to prevent distortion.
Insert bearing pillow blocks from various brands can be swapped if the mounting dimensions, shaft diameter, and fastening type line up. The DODGE GTMU series has counterparts in other commercial lines, but always check the housing and insert dimensions before substituting. We can help you find a compatible alternative for your equipment.
To request a DODGE GTMU series Y-bearing pillow block, send the part number or model from your machine via WhatsApp or email. Our team will reply promptly with a quote and suggest the best option for your application. We can also review series variants based on your shaft dimensions.
Dimensions
- Bore
- 25 mm
Frequently asked questions
- How do I identify the size of the GTMU pillow block I need?
- The last number in the part number, such as 25 or 45 in P2B-GTMU-25M or P2B-GTMU-45M, indicates the shaft diameter in millimeters. Measure your shaft and compare it with the designation. If you are unsure, send us the part number via WhatsApp and we will help you confirm.
- What applications do Y-bearing pillow blocks have?
- They are used in conveyors, elevators, mixers, fans, and general machinery. They support rotating shafts and allow mounting on structures. They are common in food plants, mills, and agricultural equipment.
- Can DODGE GTMU pillow blocks be replaced by other brands?
- Yes, if the mounting dimensions, shaft diameter, and fastening type match. The GTMU series has equivalents in other brands. We will tell you the alternative compatible with your equipment.