DODGE P2B-GTMAH-111 pillow block bearing

DODGE P2B-GTMAH-111 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTMAH-111 and any equivalents.

The DODGE P2B-GTMAH is a two-hole pillow block that uses an ER-Series insert bearing to support rotating shafts where alignment and sealing matter. It is a common choice for conveyors, mixers, and process equipment, and it allows the insert to be replaced without removing the housing from its mounting.

Reading the code helps with selection: P2B identifies a two-hole pillow block, GTMAH covers the housing and sealing arrangement, and the trailing number gives the shaft size. For instance, P2B-GTMAH-012 is built for a 12/16 inch shaft, and other codes in the series cover additional diameters. The ER-Series insert has an extended inner ring secured with set screws.

Typical applications include belt conveyors, elevators, mixers, mills, and other process lines in food, chemical, cement, and aggregate operations. In dusty, humid, or washdown environments, the GTMAH sealing helps keep contaminants out and lubrication in. Because the insert is separate from the housing, replacement is straightforward when the bearing reaches the end of its service life.

When selecting a unit, confirm the shaft diameter, the radial and axial loads, and the operating environment. Check that the housing is aligned with the shaft, then tighten the insert set screws to the recommended torque. Relubrication is done through the built-in fitting at the interval the manufacturer specifies for the speed and temperature of your application.

Housings that use the same pillow block and insert bearing nomenclature are interchangeable across brands when housing and shaft dimensions match. To request a quote, send the complete code and your operating conditions by WhatsApp or email; the team can point out a compatible alternative and help with sealing or lubrication choices.