DODGE P2B-GTEZ-07-SHCR pillow block bearing

DODGE P2B-GTEZ-07-SHCR belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTEZ-07-SHCR and any equivalents.

The GTEZ Y-bearing unit from DODGE arrives as a complete pillow block: cast iron housing plus ball insert, already mounted and aligned at the factory, so it only needs to be bolted to the frame. It carries transmission shafts in equipment that calls for stiffness, self-alignment and sealing against dust, water or washdown. MR Industrial Accessories LLC supplies this line to customers throughout the United States and in several Latin American countries.

Read the reference in sections. P2B tells you it is a two-bolt split pillow block. GTEZ names the housing family that takes an insert ball bearing with reinforced sealing. The digits after that correspond to the shaft diameter code, which changes from one code to another in this series. SHCR closes the reference and identifies the insert and seal version. Ordering works best with the full code in hand.

Typical duty covers belt and roller conveyors, packaging lines, mixers, blowers, screens, bucket elevators and washing lines. Plants handling food, cement, aggregates, water treatment and chemicals rely on them where humidity or airborne particles demand a closed support that is simple to relubricate. They also serve as drop-in replacements when a mounted assembly is preferred over a loose bearing.

Selection starts with shaft diameter, then the radial and axial loads the shaft will see, and finally the contaminant present in the area. SHCR sealing suits dusty or damp conditions; where pressure washing is routine, look at adding protection. Set the base on a flat, rigid surface, tighten the bolts without distorting the housing, and confirm shaft alignment before start-up. The insert self-aligns to absorb small misalignments, though it is no substitute for proper alignment.

Cross-brand replacement comes down to mounting dimensions: bolt center distance, height to shaft center, shaft diameter and fixing method. A unit from another maker with matching dimensions can stand in for the GTEZ, but the seal type and the way the insert locks onto the shaft also need checking. When the code does not line up, those dimensions, not the trade name, decide the alternative. Send the code or the dimensions through WhatsApp or email and MR will point you to the compatible option.