DODGE P2B-GTB-75M pillow block bearing

DODGE P2B-GTB-75M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTB-75M and any equivalents.

The DODGE GT series Y-bearing pillow block is a foot-mounted unit that pairs an insert ball bearing with a cast iron housing. It supports rotating shafts in equipment that needs a compact, self-aligning assembly that is straightforward to install. Depending on the variant, the insert is secured with set screws or an eccentric collar.

The code follows a fixed pattern. The P2B prefix identifies a two-bolt pillow block. GT is the housing family. The number that follows is the shaft diameter in millimeters, and the trailing M marks the insert with set screws. Once you know the pattern, you can order the exact unit by reading the code.

Typical applications include belt conveyors, bucket elevators, mixers, mills, screens and other process equipment in food, chemical, cement and aggregate plants. They also appear on fans, pumps and belt drives running in dusty or moderately humid conditions.

Selection starts with the shaft diameter, the mounting type and the working conditions. The insert seal keeps contaminants out; for washdown or fine dust, extra protection is worth considering. Keep the internal clearance and lubrication as supplied and do not modify them. During mounting, align the housing with the shaft and tighten the set screws onto the inner ring. Poor alignment speeds up wear on both the bearing and the housing.

GT series pillow blocks can be interchanged with other brands that share the same mounting standard and shaft diameter. Interchangeability depends on the housing dimensions and the insert type, not on the diameter alone. When requesting a quote, send the full code and the service conditions so we can confirm the match or suggest an equivalent.