DODGE P2B-GTAH-20M pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- ER-Series
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-GTAH-20M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-GTAH-20M and any equivalents.
A mounted unit from DODGE, the P2B-GTAH pairs a split cast iron housing with an insert ball bearing from the ER-Series. It carries rotating shafts in equipment that calls for proper alignment and permanent lubrication. We supply this line and assist with size selection.
Reading the code helps when ordering. P2B tells you it is a two-bolt split pillow block. GTAH covers the housing design and how it attaches. The trailing number gives the shaft diameter in millimeters. ER-Series is the family of insert bearings used in these units, each with its own sealing and attachment details.
Typical duty includes belt conveyors, bucket elevators, mixers, mills, packaging belts and other process lines in food, chemical, cement and aggregate operations. In such settings the cast housing and the insert seal handle dust and moisture, which is why the unit is common in feed plants, aggregate processing and packaging lines.
Selection starts with the shaft diameter, then the load type: mainly radial or combined. The base needs a flat, rigid surface, and the two housing halves must be aligned before the mounting bolts are tightened evenly. Grease goes in through the fitting built into the housing. Follow the manufacturer's interval and use a grease that suits the seal.
On interchangeability, pillow blocks with insert bearings from various brands frequently share standardized mounting dimensions. Even so, check shaft diameter, center height and hole spacing before substituting. The DODGE ER-Series has equivalents in other lines, and we can point you to a compatible option when replacing existing equipment.
If you have the part number stamped on the part or the equipment model, send it over WhatsApp or email. We will quote the matching P2B-GTAH pillow block with ER-Series insert bearing and advise you if a different ER-Series variant fits your application.
Dimensions
- Número de producto
- 136553
- Bore
- 20 mm
Frequently asked questions
- What does the P2B-GTAH-20M code mean?
- P2B stands for a two-bolt split pillow block, GTAH for the housing design and attachment system, and 20M for a 20 mm shaft diameter. The unit comes with an ER-Series insert bearing.
- How do I know if this pillow block replaces the one I have installed?
- Check the shaft diameter, the distance between base holes and the center height. If those match, it is likely interchangeable. Send a photo or the old part number by WhatsApp and we will confirm the equivalence.
- What lubrication does the insert bearing require?
- Grease it through the fitting built into the housing. Use general-purpose lithium grease or the grade recommended for the working temperature. How often depends on conditions: dustier or wetter environments need shorter intervals.