DODGE P2B-DLU-104S pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-DLU-104S belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-DLU-104S and any equivalents.
The DODGE D-Lok P2B-DLU-104S is a mounted pillow block that pairs a split cast iron housing with an insert ball bearing, designed to be bolted to a flat base. It supports and guides rotating shafts where alignment and simple mounting matter.
The code reads in sections: P for pillow block, 2 for the housing series, B for split mounting, DLU for the D-Lok insert and its locking method, and 104 for the shaft size. The trailing S denotes a seal or configuration variant. Use this pattern to find other sizes in the line.
Typical installations include belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment. The cast iron housing takes moderate radial and axial loads, while the ball insert suits the speeds common to transmission shafts. It is a practical choice where dust, moisture or washdowns are present.
Selection depends on shaft diameter, load type, speed and operating environment. The insert seal determines protection: single lip, labyrinth or contact seals are available to keep dirt out. Mounting calls for a flat, rigid base, aligned pillow blocks and correct tightening of the insert locking system. Lubricate with compatible grease and check at the recommended service intervals. Good alignment reduces load on the bearing and shaft.
DODGE pillow blocks often cross with equivalent lines from other makers, but interchange is not automatic. Before replacing, confirm shaft diameter, hole spacing, center height and locking style. Compatible options may exist within the families MR supplies.
MR Industrial Accessories LLC supplies the DODGE line and manufactures split plummer block housings, ANSI roller chains and sheaves. For a quote on P2B-DLU-104S or another shaft size, send the part number by WhatsApp or email. We reply promptly and can suggest equivalents and help with seal selection and mounting.
Dimensions
- Número de producto
- 128706
- Bore
- 1-1/4 in
Frequently asked questions
- What does the code P2B-DLU-104S indicate?
- P stands for pillow block, 2 for the housing series, B for split mounting, DLU for the D-Lok insert, and 104 for the shaft size. The final S indicates a sealing or configuration variant. This pattern helps you identify other sizes in the D-Lok range.
- How do I select the right D-Lok pillow block?
- Determine the shaft diameter, load type, speed and working conditions. Then pick the seal that matches the dirt or moisture level. If unsure, send those details by WhatsApp or email and we will help you choose.
- What is required for proper mounting?
- Use a flat, rigid base and align the pillow blocks with each other. Tighten the insert locking system correctly and lubricate with compatible grease. Check lubrication at the recommended intervals. Proper alignment helps extend bearing and shaft life.