DODGE P2B-DLM-108 pillow block bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DLM
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE P2B-DLM-108 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-DLM-108 and any equivalents.
The DODGE DLM series Y-bearing unit is a pillow block assembly that pairs a split cast iron housing with a ball insert locked to the shaft by the D-Lok system. It supports transmission shafts where rigidity, straightforward installation and protection from dust and moisture matter. MR Industrial Accessories LLC supplies this DODGE line to customers across the United States and in several Latin American countries.
Reading the part number helps you specify the right unit. P2B denotes a two-bolt split pillow block, DLM identifies the housing and insert series, and the trailing number gives the shaft size, as in P2B-DLM-100, P2B-DLM-103 or P2B-DLM-115. The D-Lok suffix refers to the shaft-fixing method, which does away with traditional set screws and makes on-site adjustment simpler.
You will find these units on belt and roller conveyors, packaging lines, mixers, blowers, centrifugal pumps, screens and milling lines. They suit food plants, cement plants, cold storage, tanneries and aggregate processing, where dust or moisture calls for a robust housing and a well-sealed insert.
Selection depends on shaft diameter and tolerance, expected radial and axial load, and the sealing required by the environment: abrasive dust, frequent washdown or constant moisture. For mounting, set the unit on a flat, rigid base, align both halves before tightening the bolts, and verify insert clearance. Lubricate according to the duty cycle and check shaft alignment to avoid stressing the insert.
Mounted units can be interchanged between brands by dimensional designation: a two-bolt split pillow block for a given shaft is often compatible across manufacturers, though the fixing system, sealing and housing height differ. Always compare shaft size, outer diameter, bolt spacing and center height before replacing one unit with another.
To replace a Y-bearing insert or set up a new line, send the part number from the nameplate or the part itself via WhatsApp or email, for example P2B-DLM-104. The team replies promptly, provides a quote and can suggest equivalents or help you choose if you need another variant of the DLM series.
Dimensions
- Número de producto
- 128826
- Bore
- 1-1/2 in
Frequently asked questions
- What does D-Lok mean on these bearing units?
- D-Lok is the shaft-fixing system used by the DLM series. It lets you adjust the bearing on the shaft without traditional set screws, which simplifies mounting and reduces the risk of marking the shaft during adjustment.
- How do I choose the right DLM bearing unit?
- You need the shaft diameter, the radial and axial load, and the environment type. Those details define the insert size and sealing. If you send the old unit's part number via WhatsApp or email, we can quote the equivalent from the DLM series.
- Can I replace a bearing unit from another brand with a DODGE DLM one?
- Generally yes, if shaft size, bolt spacing, center height and outer diameter match. Fixing system and sealing may differ between manufacturers. Send us the dimensions or part number and we will indicate the compatible alternative.