DODGE P2B-DLB-110L pillow block bearing

DODGE P2B-DLB-110L belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-DLB-110L and any equivalents.

The DODGE D-Lok series pillow block is a mounted unit with an insert bearing, built for rotating shafts in industrial equipment. It suits applications that call for a self-aligning, sealed assembly capable of handling radial loads and some axial thrust. MR Industrial Accessories LLC supplies this line to customers throughout the United States and in several Latin American countries, and can help you match the right configuration to your shaft diameter and mounting arrangement.

Reading a D-Lok code is straightforward once you know the blocks. The leading letters tell you the pillow block type, the D-Lok segment in the middle identifies the insert-to-shaft locking method, and the trailing number gives the shaft diameter in hundredths of an inch. A final letter, such as L, denotes the sealing variant. With that logic you can order the exact code instead of guessing.

Typical installations include conveyors, belts, elevators, mixers, mills and process equipment. In food, cement, mining, paper and aggregate plants, dust, moisture and frequent washdowns are common, so the D-Lok series is a solid choice for shafts turning at moderate speeds that need self-alignment.

Selection comes down to shaft diameter, radial and axial load, and the surrounding environment. The insert seal determines how well the unit keeps contaminants out, so pick the seal type based on whether dust, water or chemicals are present. During mounting, clean the shaft, confirm the tolerance is suitable, and tighten the D-Lok locking system without striking the bearing. Use the lubricant specified by the manufacturer and check pillow block alignment to avoid added stress.

On interchangeability: insert-bearing pillow blocks can be swapped between brands when shaft diameter, mounting height, hole spacing and locking type all agree. A similar code is not sufficient; the critical dimensions must be compared. If you are replacing an existing unit, send us the original code and we will point you to a compatible alternative.

MR Industrial Accessories LLC supplies the DODGE brand. If you need a D-Lok series pillow block, send the code by WhatsApp or email and we will quote it promptly. We can also advise you if you require a different seal or shaft diameter.