DODGE P2B-DL-60M pillow block bearing

DODGE P2B-DL-60M belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P2B-DL-60M and any equivalents.

This DODGE D-Lok series pillow block is a mounted unit that pairs a cast iron housing with an insert ball bearing. It supports transmission shafts in applications that call for self-aligning operation, straightforward installation, and the ability to handle radial loads along with some axial thrust.

The D-Lok code is structured in parts. The letter P stands for pillow block, the following digit indicates the housing size, and the DL suffix denotes the D-Lok shaft locking method. The number at the end, as seen in P2B-DL-20M or P2B-DL-70M, gives the shaft diameter in millimeters. Reading the code this way identifies the full assembly: housing, insert, and locking system.

These units are common in belt conveyors, bucket elevators, mixers, screens, mills, and process lines across food, chemical, and aggregate operations. They suit material handling equipment and machinery where shafts turn at moderate speeds and lubrication intervals are infrequent. The cast iron housing stands up to dusty or humid conditions often found in those settings.

When selecting a unit, consider the shaft diameter, the radial load and axial thrust it must absorb, and the sealing type for the environment—dust, water, or washdown. The D-Lok system secures the insert to the shaft without set screws on the diameter, which makes mounting and removal easier. Before startup, check base alignment and lubrication.

Mounted units can be interchanged between brands by shaft number and housing configuration, but locking systems, seals, and tolerances differ. Compare center height, mounting hole spacing, and locking type before substituting one unit for another. If the code does not match exactly, find a compatible alternative using those same dimensions.