DODGE NSTU-SCMED-40M take-up bearing

DODGE NSTU-SCMED-40M belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NSTU-SCMED-40M and any equivalents.

Mounted take-up assemblies in the DODGE SCMED line pair a Y-bearing insert with a take-up housing, so a drive shaft gets support plus a way to set belt or chain tension. They handle moderate radial and axial loading, install without special tooling and tolerate a small amount of misalignment between the two units on a shaft.

The part number tells you most of what you need. Take NSTU-SCMED-25M: NSTU is the take-up unit series, SCMED is the insert bearing series, the digits give the shaft size in millimeters, and the trailing M marks a construction variant. The same pattern runs through NSTU-SCMED-40M for a 40 mm shaft and NSTU-SCMED-55M for a 55 mm shaft, so once you know the code you can order the exact size off the nameplate.

Typical duty covers belt conveyors, bucket elevators, mixers, mills and general process equipment in food, chemical, cement and aggregate plants, including feed mills, crushing circuits and bulk material handling. The housing takes up slight misalignment, and when the insert finally wears out it can be swapped without replacing the whole assembly.

Selection comes down to three checks: shaft diameter, whether the load is radial, axial or combined, and the surrounding conditions. The insert seal keeps out dust and moisture; where contamination is heavy, a variant with a supplementary seal is the better choice. On installation, line the two units up with each other, press on the insert rather than hammering it, torque the set screws and keep the lubrication schedule current.

Take-up units from other makers are often interchangeable with the SCMED series when the key dimensions agree: shaft diameter, mounting hole spacing and height to center. Confirm those figures before substituting anything. Send the part number or the dimensions and we will point you to a compatible option.

Quotes are handled by part number over WhatsApp or email, and the team responds quickly. If the exact variant is not obvious from your documentation, send the model or shaft dimensions instead and we will come back with the right reference and guidance on mounting and lubrication.