DODGE NSTU-SC-25M-NL take-up bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE NSTU-SC-25M-NL belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NSTU-SC-25M-NL and any equivalents.
The DODGE SC series Y-bearing is a mounted unit supplied ready to install. It combines an insert ball bearing with a cast iron housing, so a rotating shaft can be supported on a structure or frame. The insert runs on the shaft and the housing bolts down, which keeps alignment straightforward. Lubrication is sealed for life, so there is nothing to top up in normal service.
Reading the code helps you order the right piece. NSTU tells you it is a mounted unit, SC is the housing series, and the number after SC is the shaft diameter in millimeters, as in NSTU-SC-20M-NL or NSTU-SC-40M-NL. The M suffix covers the insert locking type, and NL points to a sealing or housing variant. With those blocks clear, a replacement insert or a complete unit can be specified without guesswork.
Typical duty covers food and bottling lines, milling, mixing and ventilation equipment, plus conveyors, agricultural machinery and transmission systems in chemical and petrochemical plants. The compact, self-aligning design suits shafts that need support at an intermediate or end point, mounted on steelwork or masonry.
Selection comes down to shaft diameter, the radial and axial loads you expect, and the surroundings: dust, moisture or frequent washdowns. The insert seal is what holds lubricant in and keeps contaminants out. At mounting, check that the housing lines up with the shaft and tighten the bolts evenly. Life lubrication removes routine greasing, although severe environments may call for replenishment.
For equivalences, DODGE SC series units interchange with other brands built to the same dimension and locking standard, including equivalent series from SKF, NTN or Timken. Confirm shaft diameter, hole pitch and locking type before substituting. We can point you to the compatible alternative for your application.
To request a quote, send the complete part number, for example NSTU-SC-30M-NL, by WhatsApp or email. We reply promptly and can suggest the right variant if your equipment needs a special configuration.
Dimensions
- Bore
- 25 mm
Frequently asked questions
- What do the M and NL suffixes mean in the NSTU-SC designation?
- M indicates the insert locking type to the shaft, generally set screws. NL refers to a sealing or housing configuration variant. Both suffixes identify the exact version within the SC series.
- How do I choose the correct diameter for my application?
- The number after SC is the shaft diameter in millimeters: 20, 25, 30, and so on. Measure the shaft with a caliper and match the unit to it. If you are unsure, send us the measurement and we will quote the appropriate reference.
- Can it be replaced by units from other brands?
- Yes, provided the mounting dimensions, shaft diameter and locking type match. Equivalent series from other brands are usually interchangeable. Send us the original part number and we will indicate the compatible alternative.