DODGE NSTU-DL-30M take-up bearing
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE NSTU-DL-30M belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NSTU-DL-30M and any equivalents.
This DODGE Y-bearing insert bracket is a mounted unit that pairs a cast iron housing with a ball insert bearing, built to carry rotating shafts in belt, chain or direct-coupled drives. The D-Lok series uses an eccentric locking collar on the shaft, which keeps mounting and removal straightforward. It suits equipment that needs steady support and alignment, such as conveyors, fans and machine tools.
Reading the NSTU-DL-…M code: NSTU is the Y-type bracket family with insert bearing, DL denotes the D-Lok series with eccentric locking collar, the following number gives the shaft diameter in millimeters, and the trailing M confirms metric dimensions. So NSTU-DL-20M fits a 20 mm shaft and NSTU-DL-30M a 30 mm shaft. The range from NSTU-DL-20M through NSTU-DL-55M covers shaft sizes from 20 to 55 mm.
These brackets are at home in food, textile, wood and aggregate operations, where dust, moisture or washdown call for a robust unit. Typical installations include belt conveyors, screens, mixers, exhaust fans and packaging lines. The self-aligning design absorbs minor misalignment and lets the shaft be mounted without special machining, which helps hold downtime down on critical equipment.
When selecting a bracket, confirm the shaft diameter and the load type; belt drives are mainly radial. Mounting a D-Lok unit is simple: slide the bearing onto the shaft, turn the collar in the direction of rotation and secure it with the set screw. Lubricate with lithium grease and check axial play. Aligning brackets with each other avoids stress and supports the service life of the insert bearing.
DODGE D-Lok series brackets can be interchanged with other brands offering similar eccentric-locking units, provided the shaft dimensions and mounting hole spacing match. MR Industrial Accessories LLC supplies this line and can help you find an equivalent reference. Because interchangeability depends on housing dimensions and insert type, each case should be verified.
To request a quote, send the part number for your shaft, such as NSTU-DL-20M or NSTU-DL-30M, by WhatsApp or email. The team replies promptly, can suggest equivalents and will help you choose the right bracket. We can also advise on proper mounting and lubrication for your application.
Dimensions
- Bore
- 30 mm
Frequently asked questions
- What does the NSTU-DL designation mean on this bracket?
- NSTU identifies the Y-type bracket family with insert bearing; DL indicates the D-Lok series with eccentric collar locking. The number that follows is the shaft diameter in millimeters, and the final M shows the metric system.
- How is a D-Lok bracket mounted on the shaft?
- Slide the bearing onto the shaft, orient the eccentric collar in the direction of rotation and tighten the set screw. Then fasten the housing to the structure with the appropriate bolts, checking alignment and lubricating beforehand.
- Is this bracket compatible with other brands?
- It may be interchangeable with other eccentric locking units when the shaft diameter and mounting dimensions match. To confirm equivalence, send the code or the measurements and we will indicate the compatible alternative.