DODGE MW882GH160P4 gearmotor

DODGE MW882GH160P4 belongs to gearmotor, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MW882GH160P4 and any equivalents.

DODGE gearmotors with part numbers ending in GH160P4 combine a motor and a gear reducer into one assembly. Examples include MW1082GH160P4, MW1483GH160P4 and MW882GH160P4. The initial block after MW varies between part numbers and defines the unit's characteristics, while the GH160P4 ending is shared across this type.

These units are used when a machine needs to run at a speed lower than the motor's and with higher torque at the output shaft, without mounting a separate motor and reducer. Typical applications include conveyor belts, agitators, mixers and elevators.

To read the part number, split it into two blocks. The first block, MW followed by a number such as 882, 1082, 1283 or 1682, identifies the specific version and its characteristics. The second block, GH160P4, is identical for all part numbers of this type and is also part of the complete designation. Because of this, two part numbers with different initial numbers are not interchangeable.

When selecting a gearmotor, gather the required output speed, torque, power, load type (uniform, shock or frequent starts) and daily operating hours. Also note the mains voltage and frequency, mounting position and output shaft type. With this information, you can confirm that a given part number suits the application.

For installation, mount the unit on a rigid, level base and align it with the driven machine. Leave space for motor ventilation. Before startup, check the lubricant level and type, and verify the direction of rotation. For maintenance, refer to the manufacturer's manual.

To request a quote, send the complete part number, for example MW1082GH160P4, by WhatsApp or email. If you want help confirming the selection, include your application data. Our team replies promptly and can suggest equivalents.