DODGE LFT-SXV-104-NL flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXV
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE LFT-SXV-104-NL belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LFT-SXV-104-NL and any equivalents.
The DODGE SXV series 2-bolt flange Y-bearing is a mounted unit that fastens to a flat surface. It guides rotating shafts in equipment where frontal mounting and straightforward alignment are needed. MR Industrial Accessories supplies this DODGE line and helps you select the right size for your shaft and application.
The part number is structured in blocks: LFT for the 2-bolt flange housing, SXV for the insert bearing series, and NL for the seal type. The middle number, as in LFT-SXV-008-NL or LFT-SXV-100-NL, specifies the insert bore size. So the complete reference tells you the format, series, and size at a glance.
You will find these units on belt conveyors, bucket elevators, mixers, screens, and packaging lines. They also appear in milling equipment, centrifugal pumps, and industrial fans. The 2-bolt flange is a practical solution for mounting on sheet metal or cast iron where a pillow block housing will not fit. The SXV series handles general-purpose shafts with moderate loads.
When selecting, consider shaft diameter, load type, and rotation speed. The NL seal guards against dust and splashes, making it suitable for dirty or humid environments. During installation, place the flange on a clean, flat surface, tighten bolts in a cross pattern, and confirm the shaft turns freely. Lubricate according to the operating conditions and check alignment to prevent premature insert wear.
Mounted units like this are available in various brands and equivalent series. Interchangeability depends on shaft diameter, the distance between flange holes, and the insert locking type. If your equipment uses another brand, send us the part number or dimensions and we will identify the compatible DODGE alternative. Do not mix series without verifying the seat and seal.
If you have a part number such as LFT-SXV-008-NL, LFT-SXV-100-NL, or any other in the series, send it via WhatsApp or email for a prompt quote. We can also review the variant that best matches your shaft and equipment conditions. At MR, we help you resolve your mounted bearing needs efficiently.
Dimensions
- Bore
- 1-1/4 in
Frequently asked questions
- What does the part number LFT-SXV-008-NL mean?
- LFT stands for the 2-bolt flange housing, SXV for the insert bearing series, and NL for the seal type. The middle number, 008 in this case, is the bore size. The full part number identifies format, series, and size.
- How do I determine the correct housing size?
- Measure the shaft diameter where the insert mounts and the distance between the flange holes. With those dimensions, we can specify the matching SXV series reference. If the shaft is worn, check the tolerance before choosing.
- Can it be replaced by another brand?
- Yes, provided the shaft diameter, hole spacing, and locking type match. Send us the original unit's part number or dimensions, and we will indicate the compatible DODGE alternative. Changing series without verifying the seat is not recommended.