DODGE LFT-SCEZ-20M-SHSS flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ SHSS
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE LFT-SCEZ-20M-SHSS belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LFT-SCEZ-20M-SHSS and any equivalents.
This DODGE mounted unit pairs a cast iron 2-bolt flange bracket with a self-aligning insert ball bearing from the SCEZ SHSS line. It bolts to a flat face with two fasteners and supports a rotating shaft in conveyors, agitators, blowers and similar process equipment.
Reading the code helps with selection. The LFT prefix denotes the 2-bolt flange housing. SCEZ identifies the insert bearing and its locking method, while SHSS covers the seal type and housing finish. The figure after the hyphen is the nominal shaft size in millimeters, so LFT-SCEZ-20M-SHSS, LFT-SCEZ-25M-SHSS, LFT-SCEZ-30M-SHSS and LFT-SCEZ-35M-SHSS fit 20, 25, 30 and 35 mm shafts. The trailing M means the mounting holes are metric threaded.
Typical installations include food and beverage plants, packaging lines, water treatment, material handling, screw conveyors, norias and mills. The two-bolt design lets you mount the shaft against a vertical or horizontal face with just two anchor points, which helps where space is tight or when alignment is needed after the structure is welded.
Before ordering, confirm the shaft diameter and the distance between the two flange holes. The SCEZ SHSS insert uses a seal that holds grease in and keeps dust out, making it suitable for moderately dirty areas. Because the bearing self-aligns inside the housing, small misalignments are absorbed. During installation, set the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns freely. Grease through the insert channel at intervals set by your application and temperature.
Interchangeability: 2-bolt flange brackets with insert bearings are made by several manufacturers with standardized shaft and hole dimensions. Matching the shaft diameter alone is not enough; compare hole spacing, center height and insert locking style. Send us your flange dimensions and shaft size, and we will point you to a compatible option from the DODGE line we supply.
To request a quote, message us on WhatsApp or by email with the full part number, for example LFT-SCEZ-30M-SHSS, or the flange dimensions. Our team responds promptly and can suggest equivalents and help you choose the right unit.
Dimensions
- Número de producto
- 136879
- Bore
- 20 mm
Frequently asked questions
- What does the M mean in LFT-SCEZ-20M-SHSS?
- The final M indicates that the flange mounting holes have metric thread. This matters when selecting bolts: metric holes require metric bolts. Send us the complete part number and we will quote the unit.
- How can I tell if this bracket replaces the one I have?
- Check the shaft diameter, the spacing between the two flange holes and the center height. If they match, the unit is compatible. If you don't have the original part number, send us those three dimensions via WhatsApp and we will indicate the alternative.
- How often should a flange bracket with insert be lubricated?
- It depends on speed, load and environment. In normal applications, grease every 500 to 1000 running hours; with dust, humidity or high temperature, shorten the interval. Always follow the equipment manufacturer's recommendation.