DODGE LFT-SC-014 flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE LFT-SC-014 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LFT-SC-014 and any equivalents.
The DODGE SC series 2-bolt flange bearing is a mounted ball insert unit that supports a shaft against a flat surface and carries radial loads in power transmission systems. You will find it on conveyors, mixers, fans and other process or agricultural equipment where a low-profile, straightforward mounting is required. MR Industrial Accessories supplies this DODGE line and helps you match the right size to your application.
In the SC series part number, the last three digits tell you the shaft size in inches or its metric equivalent from the manufacturer's table. The LFT prefix stands for the 2-bolt flange housing, while SC identifies the insert bearing family. To get the correct reference, provide your shaft size and the complete part number when you reach out on WhatsApp.
Typical installations include belt conveyors, bucket elevators, mixers, centrifugal fans and process equipment in food, chemical and grain facilities. The same bearings appear on seeders, harvesters and mills, where they handle dust, humidity and moderate radial loads. The 2-bolt flange mounts to sheet metal or welded frames, allows simple alignment and comes off quickly for maintenance.
When selecting, consider shaft diameter, load type and operating environment. The SC insert has a seal that keeps grease in and dust out; in washdown or humid conditions, check lubrication and lip condition more often. Mount the flange on a clean, flat surface, tighten bolts in a cross pattern and confirm the shaft turns without axial play. Misalignment will shorten insert life.
Interchangeability across brands depends on shaft number and flange configuration. A 2-bolt bearing with a ball insert from another maker can replace the DODGE SC if mounting dimensions, shaft diameter and locking method match. The commercial part number alone is not enough: compare hole spacing, center height and locking system. If you are unsure, send us the original reference and we will point you to a compatible alternative.
MR Industrial Accessories supplies DODGE bearings. For an LFT-SC unit, message us on WhatsApp with the part number or shaft size and we will reply with a quote. We can also advise on the insert, seal and proper lubrication for your equipment.
Dimensions
- Número de producto
- 124643
- Bore
- 7/8 in
Frequently asked questions
- How do I identify the size of the DODGE SC bearing I need?
- Measure the shaft diameter at the insert mounting point and compare it with the SC series table. The part numbers correspond to different shaft sizes. Send that measurement on WhatsApp and we will quote the exact reference.
- What is the difference between a 2-bolt flange bearing and a pillow block?
- The flange type fastens to a flat surface with two bolts and keeps the shaft perpendicular to the support; a pillow block sits on a horizontal base. Your choice depends on the space and how the shaft is positioned. For the SC series, the 2-bolt flange is the standard configuration.
- How do I maintain the insert bearing of an SC bearing?
- Inspect the seal and relubricate according to the working environment. In dusty or humid areas, shorten the intervals and make sure the insert turns without noise or play. If the lip is damaged, replace the insert. Contact us on WhatsApp to select the replacement part.