DODGE LF-GT-20M flange bearing 3 holes

DODGE LF-GT-20M belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for LF-GT-20M and any equivalents.

This DODGE GT series Y-bearing insert flange unit is a 3-bolt flange mounted bearing that secures rotating shafts to flat surfaces. It suits applications where the shaft runs perpendicular to the mounting plane and the load is mainly radial with some axial component. MR Industrial Accessories LLC supplies this DODGE line to customers throughout the United States and Latin America.

The part number follows a clear pattern. The LF prefix denotes the flange housing family, GT is the construction series, and the number with the trailing M gives the shaft diameter the insert is bored for. In practice, LF-GT-17M, LF-GT-20M, LF-GT-25M, LF-GT-30M and LF-GT-35M all share the same flange geometry but differ in bore size. When reordering, that final M is the critical figure: it changes the insert bore, not the housing.

These 3-bolt flange units are common on equipment where the shaft is supported by sheet metal or cast iron: conveyors, mixers, blowers, exhausters, food processing machinery and packaging lines. They are also found in grain handling, meat processing, tanneries and metalworking shops that need a bearing unit ready to bolt on, with the insert already fitted in the housing and sealed against dust and moisture.

Selection comes down to three points: the shaft diameter required, the load type (mostly radial or combined), and the operating environment. Where water, dust or frequent washdowns are present, an insert with enhanced sealing is the better choice. For mounting, set the flange on a flat, clean surface, tighten the three bolts in a cross pattern, and confirm the shaft turns without resistance. Proper lubrication of the insert and careful shaft-to-flange alignment help extend the life of the assembly.

DODGE is a well-known name in mounted bearings, and MR Industrial Accessories LLC offers it within its housing range. When replacing a unit, interchangeability between brands is determined by shaft diameter, flange type, bolt count and mounting dimensions, not by the commercial part number. It is therefore wise to compare those dimensions before substituting one unit for another from a different manufacturer.

To request a quote for a DODGE GT series Y-bearing insert flange unit, send the complete part number via WhatsApp or email—for example, LF-GT-25M—or provide the shaft diameter and flange arrangement. The team replies promptly and, if you need a variant you do not see, can suggest a compatible alternative and help you choose.