DODGE INS-SCMED-308 insert bearing

DODGE INS-SCMED-308 belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-SCMED-308 and any equivalents.

The Dodge SCMED series insert bearing is a ball bearing with an extended inner ring, made to sit inside split plummer block housings and wall or floor units. It suits shafts that turn under moderate radial load where a certain amount of misalignment has to be absorbed, and where the equipment is taken apart and put back together often. MR Industrial Accessories LLC supplies it to customers in the United States and Latin America, quoting by WhatsApp or email once you send the full code.

Read the reference in three blocks: INS tells you the piece is an insert meant for a housing, SCMED names the series inside the Dodge mounted bearing line, and the closing digits give the bore size. That is how codes like INS-SCMED-100, INS-SCMED-103 and INS-SCMED-200 live side by side, since only the numeric suffix moves while the family stays the same. The easiest way to order the right one is to copy the code exactly as it appears on the machine or on the drawing.

Typical duty covers belt conveyors, bucket elevators, mixers, screens and packaging lines, plus augers in agricultural work and fans, pumps and light gearboxes in plant rooms. What the insert buys you is simple: the bearing can be swapped out without tearing down the whole housing, because the outer ring comes free while the shaft stays supported in the same unit.

Selection comes down to three things: shaft diameter, how the inner ring locks, and the sealing the environment demands. Dusty, wet or washdown areas call for an insert with heavier containment seals, while a clean spot does fine with standard sealing. At mounting, confirm housing alignment, keep the hammer off the raceway, and lubricate for the working temperature. Misalignment costs more service life than anything else.

Interchange is judged on shaft size, inner ring width and locking type rather than on anyone's catalog code. The same bore can carry different letters from brand to brand, so those three variables settle the match. If you are unsure, send the old code together with the shaft dimensions and we will point you to the compatible option in the SCMED series.

MR Industrial Accessories LLC carries the Dodge brand within its bearings and housings range. For an SCMED insert, message us on WhatsApp or by email with the code or model from your equipment and the team will come back with a quote and, if needed, suggest equivalents.