DODGE INS-SCED-104S insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- SCED
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-SCED-104S belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-SCED-104S and any equivalents.
The DODGE SCED insert bearing is a ball bearing with an extended inner ring, made to fit into split housings and wall units. It handles radial loads and some axial thrust where simple alignment is needed. MR Industrial Accessories LLC supplies this line to plants and maintenance teams across the United States and several Latin American countries. To get a quote, just send the part number by WhatsApp or email.
The code INS-SCED-104S breaks down as follows: INS stands for the insert series, SCED indicates the housing and sealing type, and 104 refers to the bore diameter size. The final S marks the standard sealing variant. When you need a replacement, provide the complete part number so we can identify the exact insert size and configuration.
These insert bearings are common on conveyors, mixers, fans, centrifugal pumps and other process equipment. They appear in food, cement, paper and agro-industrial plants, where dust or moisture demands dependable sealing. Packaging machines and production lines that need fast maintenance without pulling the entire shaft also rely on them.
Selecting the right insert starts with the shaft diameter and the housing type. The SCED seal keeps contaminants out and lubrication in; in washdown areas, inspect the lip condition regularly. During installation, make sure the housing is aligned and avoid striking the outer ring. Use the lubricant specified for the operating temperature. Internal clearance is set at the factory and cannot be adjusted.
Insert bearings carry different designations depending on the manufacturer. To cross a SCED to another brand, compare bore diameter, inner ring width, shaft locking method and seal arrangement. Matching only the shaft size is not enough—the insert height and locking system also matter. If you have the original part number, we can point you to a compatible alternative.
For a SCED insert bearing or an equivalent for equipment that is down, send part number INS-SCED-104S by WhatsApp or email to MR Industrial Accessories LLC. We reply promptly and can advise you to ensure proper alignment and sealing during mounting.
Dimensions
- Número de producto
- 076112
- Bore
- 1-1/4 in
Frequently asked questions
- What does the part number INS-SCED-104S indicate?
- INS is the insert series, SCED defines the housing and sealing type, 104 is the bore diameter size, and the final S denotes the standard sealing variant. With that full part number, we can quote the exact bearing.
- How can I tell if this insert will replace the one currently installed?
- Check the shaft diameter, inner ring width and locking system. Also verify the overall insert height and sealing type. If you send us the old part number or measurements, we will identify a compatible alternative.
- Is it suitable for a standard split housing?
- Yes, the SCED insert is designed for compatible split housings and wall units. The housing must be in good condition and properly aligned so the bearing runs without lateral stress.