DODGE INS-SC-101-HT insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-SC-101-HT belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-SC-101-HT and any equivalents.
The DODGE SC HT insert bearing is a ball bearing with an extended inner ring that fits into split plummer block housings and wall or floor-mounted units. The HT version handles high operating temperatures where standard lubrication would break down. It is common in transmission and conveying equipment that needs straightforward alignment and fast replacement.
The part number tells you three things: SC is the series, the number is the insert size, and HT marks the high-temperature variant. Codes run from INS-SC-008-HT and INS-SC-010-HT through INS-SC-100-HT and INS-SC-101-HT. Send that code and we will quote the insert.
These inserts go into split plummer block housings and bearing units on belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment. In food, chemical, cement and aggregate plants, the insert is the wear part you replace without changing the whole housing, which keeps maintenance simple on lines running under continuous load in dusty or humid conditions.
Selection depends on shaft diameter, inner ring locking type and the sealing the environment demands. A washdown area and an abrasive dust area are not the same. Reserve the HT variant for hot zones where grease and elastomers must better resist temperature. Before start-up, verify housing alignment, axial clearance and lubrication.
Inserts of equivalent series can often be interchanged if shaft diameter, inner ring width and locking system match, but tolerances and sealing vary by manufacturer. Compare the full designation, not just the size. If you are replacing another brand, send the old code and shaft dimensions and we will identify a compatible alternative.
MR supplies the DODGE brand and also manufactures split plummer block housings, ANSI chains and sheaves. If you need an SC HT insert not listed, message us on WhatsApp with the code or model.
Dimensions
- Bore
- 1-1/16 in
Frequently asked questions
- What does the HT suffix mean on an SC insert?
- HT identifies the high-temperature variant. It shares the SC series geometry, but its lubrication and components better withstand heat. If your equipment runs in an oven, dryer or hot area, mention it when requesting a quote.
- How do I request the correct SC insert for my housing?
- Send the old insert code, the shaft diameter and a photo of the housing on WhatsApp. With that data we will quote the equivalent DODGE insert. If the housing is another brand, we can also advise on interchangeability.
- Are SC inserts suitable for dusty or wet environments?
- The SC series is used in equipment exposed to dust and humidity, but performance depends on the sealing of each variant. For frequent washdown or fine abrasives, choose the appropriate sealing. Tell us the working conditions and we will indicate the most suitable option.