DODGE INS-SC-008L-HT insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-SC-008L-HT belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-SC-008L-HT and any equivalents.
The DODGE SC series insert is a ball bearing built with an extended inner ring, made to sit inside split housings and wall units. Maintenance teams turn to it when the bearing itself has to come out while the housing stays in place, or when equipment is assembled around a split housing. Set screws hold it on the shaft, and the design takes up small amounts of misalignment.
Reading the code helps you order the right piece. INS tells you it is an insert, SC is the series from the Dodge Mounted Ball Bearings catalog, and the digits that follow point to the bore size, as in INS-SC-008L-HT, INS-SC-010L-HT and INS-SC-110L-HT. The L stands for the inner ring locking type, and HT marks the high-temperature version.
You will find these inserts on belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants, including packaging lines and machines that run dirty or get washed down often. Since it is an insert, only the bearing has to be swapped out when the housing is still serviceable.
Selection comes down to shaft diameter, locking type and the sealing the environment demands. Dust or water calls for heavier sealing, while hot running conditions point to the HT version. At mounting, clean the shaft, confirm the housing is aligned, and tighten the set screws with the correct wrench. Follow the duty cycle for lubrication and recheck clearance after the first hours of running.
DODGE is a well-known name in mounted bearings, and SC series inserts are often exchanged with equivalent lines from other makers. What matters for interchange is the bore dimensions, the inner ring width and the locking system, not the part number alone. If the old number is stamped on the part, send it over and we will point you to the compatible alternative.
MR Industrial Accessories LLC supplies the DODGE brand. For an SC series insert, message us on WhatsApp or email with the INS-SC-... number from your equipment and the team will quote it, suggest equivalents and help you choose.
Dimensions
- Bore
- 1/2 in
Frequently asked questions
- How do I find the right SC series insert for my housing?
- Start with the shaft diameter and the part number stamped on the insert you are replacing. Those two details let us pin down the size and version. If the old part is gone, send a photo of the housing plus your shaft measurements on WhatsApp and we will work it out with you.
- What does the HT suffix mean in an INS-SC part number?
- HT marks a version set up for high-temperature service, with tolerances and lubrication suited to that condition. It is not the same as a standard insert. If your equipment runs hot, that is the version to specify.
- Can a DODGE SC series insert replace one from another brand?
- Often yes, provided the bore diameter, inner ring width and locking type line up. A similar part number is not enough on its own. Send us the measurements or the original number and we will confirm the compatible option.