DODGE INS-PS-35M insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- PSEZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-PS-35M belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-PS-35M and any equivalents.
The DODGE PSEZ insert bearing is a ball bearing with an extended inner ring, made to fit split plummer block housings and wall units. It allows replacement of the bearing without replacing the entire housing, and it locks to the shaft with set screws. MR Industrial Accessories supplies this series and helps you select the right size.
The code INS-PS-…M breaks down as follows: PS indicates the insert family for split plummer block housings, the following number is the shaft diameter in millimeters, and the final M denotes the shaft fixing method. Provide the complete code when requesting a quote so we can confirm the exact size.
Typical applications include belt conveyors, packaging lines, mixers, mills, centrifugal pumps, and process equipment in food, chemical, and aggregate plants. They also appear in high-flow fans and blowers. In all these cases, the split housing simplifies maintenance by avoiding full shaft disassembly.
When selecting an insert, consider shaft diameter, load type (radial, axial, or combined), and environmental conditions. In dusty or humid areas, check the housing sealing and lubrication. Proper mounting involves cleaning the shaft, aligning the housing, and tightening the set screws with a torque wrench to the recommended torque. Misalignment reduces bearing life.
DODGE PSEZ series inserts can be interchanged with other brands that use the same diameter and fixing nomenclature, though sealing or internal clearance may differ. A replacement insert of the same diameter and fixing type will work if the housing dimensions are checked. MR Industrial Accessories can suggest a compatible alternative.
To request a quote, send the INS-PS-…M code or the housing model via WhatsApp or email. Our team responds promptly and can assist with installation and maintenance questions. We also manufacture split plummer block housings to custom dimensions if your application requires it.
Dimensions
- Número de producto
- 032878
- Bore
- 35 mm
Frequently asked questions
- How do I identify the insert I need?
- Measure the shaft diameter in millimeters and note the housing fixing type. The code INS-PS-…M indicates the size. If unsure, send a photo of the housing and the code via WhatsApp.
- Can it be mounted in a housing from another brand?
- Generally yes, if shaft diameter, insert width, and fixing type match. Housing dimensions may vary between manufacturers. Contact us with your measurements and we will indicate compatibility.
- What lubrication does this insert take?
- DODGE PSEZ series inserts come lubricated from the factory. In service, check grease condition and sealing according to working conditions. For replenishment, use a good quality lithium grease and follow the equipment manufacturer's instructions.