DODGE INS-ER-SC-200L insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- ER-SC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-ER-SC-200L belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-ER-SC-200L and any equivalents.
The DODGE ER-SC insert bearing is a ball bearing with an extended inner ring, made to fit split plummer block housings and wall units. It supports rotating shafts where alignment is simple and maintenance access matters. MR Industrial Accessories LLC supplies this line, and each size is identified by its full part number.
Reading the code helps you order the right insert. The letters ER stand for the extended inner ring insert type, SC is the mounting variant, and the number after that — as in INS-ER-SC-200L — gives the bore diameter size. The L suffix marks a specific execution within the same series. Always provide the part number exactly as it appears on the equipment or drawing.
You will find these inserts in conveyors, belts, mixers, fans and drive shafts across food, chemical, cement and aggregate processing plants. They suit moderate loads and situations where replacement needs to be quick. Because they are a standard component in the split plummer block housing line, the insert can be changed without replacing the whole housing.
Selection depends on three things: shaft diameter, the sealing needed for the environment (dust, moisture or washdown), and the internal clearance for the operating temperature. During mounting, verify housing alignment and lubricate according to the rotation regime. An insert that is not seated properly or lacks sufficient sealing will have a shorter service life, particularly in vibrating applications.
Cross-brand equivalents are matched by series and size. An ER-SC insert can interchange with references from other manufacturers that share the same diameter and mounting configuration, but confirm the exact part number before replacing. If you cannot find the original reference, MR Industrial Accessories LLC can point you to a compatible alternative.
To request a quote for the DODGE ER-SC insert, send the part number or shaft size via WhatsApp or email. The team replies promptly and, when needed, suggests an equivalent so your equipment keeps running.
Dimensions
- Número de producto
- 127391
Frequently asked questions
- How do I identify the DODGE ER-SC insert bearing I need?
- Look for the part number on the insert or housing. The ER-SC series and the number that follows — for example, 200L — define the diameter and execution. If you cannot see it, measure the shaft with a caliper and send that measurement via WhatsApp.
- Can I replace only the insert without replacing the housing?
- Yes, in most split plummer block housings the insert is removable. Check that the seat is in good condition and that the new unit fits without forcing. If you have doubts, consult us with the housing part number and we will guide you.
- What alternatives do you have if I cannot get the DODGE reference?
- We work with equivalent brands and will indicate the compatible option according to diameter and mounting type. Send the original part number or the shaft size and we will quote the alternative that best suits your equipment.