DODGE INS-DLH-104S-E insert bearing
- Brand
- DODGE
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- D-Lok
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DODGE INS-DLH-104S-E belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for INS-DLH-104S-E and any equivalents.
The DODGE D-Lok insert bearing is a ball bearing unit with an extended inner ring and an eccentric collar locking system. It mounts into split or solid housings and suits rotating equipment that needs a compact, easy-to-install assembly with good radial load capacity and alignment.
The D-Lok part number follows a simple pattern: the initial letters denote the insert family, the three-digit number gives the bore size, and the suffix S indicates the sealing arrangement. For instance, INS-DLH-104S-E is a size 104 D-Lok insert with single sealing, while the E suffix marks a construction variant. Reading the full code lets you pinpoint the exact insert.
Typical applications include belt conveyors, bucket elevators, mixers, fans, centrifugal pumps, packaging lines, and general process equipment. Maintenance teams choose these inserts for low- and medium-power machines running at standard motor speeds under moderate radial load, where replacement speed matters.
When selecting an insert, confirm the shaft diameter and the housing type. The D-Lok system secures the inner ring to the shaft with a collar and screw, which simplifies mounting and dismounting. Check the sealing condition: the S suffix defines protection against dust and moisture, important in particle-heavy environments. Use grease compatible with the operating temperature and verify housing alignment to avoid parasitic axial loads that shorten bearing life.
For interchangeability, DODGE D-Lok inserts can be replaced by equivalent units from other brands that share the same shaft diameter, locking type, and sealing configuration. Size number alone is not enough; compare inner ring width, collar position, and sealing. If you are unsure, send the original part number and we will point you to a compatible alternative.
To request a quote, message us on WhatsApp or email with the complete part number, such as INS-DLH-104S-E, or the housing model. We reply promptly and can suggest equivalents or help you choose the right variant.
Dimensions
- Bore
- 1-1/4 in
Frequently asked questions
- What does the S suffix mean in the D-Lok series?
- The S suffix identifies the insert sealing configuration. It defines the type of protection against dust, moisture, and contaminants, which is key for choosing the bearing for your working environment. In dirty conditions, verify that the sealing is adequate.
- How do I determine the correct size of D-Lok insert?
- The three-digit number in the designation indicates the bore diameter size. Measure the shaft where it mounts and compare with the original insert part number. If you do not have the part number, send us the shaft measurement via WhatsApp and we will help identify the correct reference.
- Can I replace a D-Lok insert with one from another brand?
- Yes, provided the shaft diameter, locking type, and sealing configuration match. The size number alone is not sufficient; compare inner ring width and collar position. Send us the original part number and we will indicate a compatible alternative.